NICE! 2017 Mil-tek MT1 Compressor and 2205 Plastic & Cardboard Baler. It is a flexible solution that can fit almost any location and contribute to a clean and safe working environment. The long vertical chamber creates a bale almost twice the size of a model 2102 while covering a similarly small floor space.The safety and the operational features makes the Mil-tek 2205 an ergonomic, easy, clean and safe machine to use. The 2205 can be situated close to where waste is generated, and its simple design means can be operated by any regular staff member: You simply put in your material, close the door, pull the handle and let the machine do the real work. Mil-tek machines have an extremely fast pressing cycle of between 10-20 seconds. The baler is powered by compressed air, either directly from an existing air line or from a compressor supplied by Mil-tek. This means that the Mil-tek is free of both electrical and hydraulic components, minimizing the risk of fire and completely eliminating the risk of oil contamination. Fill the chamber with cardboard or plastic and close the door. Once the handle is pressed down, the machine is activated and the minimizing has begun. Repeat until the baler is full. When the baler is ready to be emptied, tie the bale using the banding, open the lower door and release the bale. You are now ready to start a new bale! Bales can be stacked and stored until you have enough to have them collected by your local recycler. 562 pounds. 31x21x89, 116 PSI. Paid: $7,576.89.
Current: $1275.00 | Next: $1325.00
