Peaceful Fruits Production Equipment Auction – Commercial Dehydration & Food Manufacturing Equipment

Kaeser SK 15 T rotary screw air compressor with integrated refrigerated dryer and Sigma Control 2 - manufactured in Germany in January 2025. This unit is in excellent near-new condition and represents an outstanding opportunity to acquire a premium industrial compressor at a fraction of retail cost. FEATURES: Retail Price: $20,350 • 15.0 + 0.50 HP rated power with IE3 premium efficiency motor • 125 PSIG maximum working pressure with 71 CFM volume flow rate at 125 PSIG • Kaeser Sigma Control 2 intelligent controller with LCD display, RFID capability, and full diagnostic suite • Integrated refrigerated air dryer (T model) - no separate dryer needed • 3-phase, 60 Hz operation - multi-voltage: 460Y/266V, 230Y/133V, or 208Y/120V • Rated motor speed: 3565 RPM • Emergency stop button with clearly labeled reset • Compact, sound-attenuated enclosure - Made in Germany • Serial Number: 1762-10149548, Material No: 101981.01 • Construction date: January 2025 CONDITION: Rated 9/10. This compressor was manufactured in January 2025 and appears in excellent, near-new condition. The yellow and dark gray exterior panels are clean with only very minor surface marks consistent with installation and brief use. The Sigma Control 2 display panel is intact and undamaged. All safety labels, warning stickers, and data plates are present and legible. The rear cooling fan grille and electrical connections appear clean and properly maintained. The unit shows minimal operational wear, consistent with very low hours of use in a food production facility. Emergency stop button and all controls are intact and functional.

Kaeser Kompressoren vertical air receiver tank paired with a Kaeser F22KE inline compressed air filter, both in excellent near-new condition. This setup is essential for any compressed air system in food production, providing clean, filtered air storage at up to 232 PSI. The bright yellow powder-coated tank and filter look virtually unused - an outstanding value compared to retail. FEATURES: Retail Price: $4,950 • Kaeser F22KE inline filter (PN: 102115.11411) - manufactured March 2025 • Vertical air receiver tank with heavy-duty steel construction and yellow powder-coat finish • Maximum working pressure: 232 PSI (16 bar / 1600 kPa) • Temperature range: 38F to 150F - suitable for food production environments • 1 NPT threaded connections, integrated pressure gauge, safety relief valve, and bottom drain • Aluminum filter element material designation - CRN 0E22263.2C certified • Made in Germany - premium Kaeser quality CONDITION: Rated 9/10. The tank and filter appear virtually new with minimal signs of use. The yellow powder-coat finish is clean and intact with only very minor surface scuffs near the base. The pressure gauge, fittings, and all ports are in excellent shape. The Kaeser F22KE filter was manufactured in March 2025 and shows no wear. Drain valve and all connections appear complete and functional. Footed base is solid with no visible damage.

Harvest Saver R-5A Commercial Tray Dryer manufactured by Commercial Dehydrator Systems, LLC - a professional-grade dehydration unit built for high-volume food processing operations. This stainless steel powerhouse features digital controls and multi-tray capacity, with a retail value that makes this an outstanding opportunity for commercial food producers. Includes 12 custom stainless steel drying trays built for this unit. FEATURES: Retail Price: $20,000 • Full stainless steel construction throughout for durability and food-safe operation • FutureDesign MCT4 digital touchscreen for precise temperature and humidity monitoring • Variable 4-speed fan control knob for customized airflow settings • Multiple stainless steel tray rack slots visible inside the drying chamber • Front-loading hinged door with heavy-duty latch closures for secure seal • Rear exhaust vent port for proper moisture evacuation • Mounted on heavy-duty caster wheels for easy repositioning • Serial #22-865 CONDITION: Rated 9/10. This unit is in excellent condition with only light signs of use. The stainless steel exterior is clean with minor surface marks and slight discoloration on the side panels consistent with normal commercial operation. The front door latches are intact and functional. The blue control panel is clean and undamaged with the digital display and fan speed selector in good order. Interior tray racks appear clean and straight. The rear exhaust port and power cord are intact. Caster wheels are present and in working order. Overall a very well-maintained commercial dehydrator ready for continued production use.

Commercial-grade Harvest Saver R-5A Tray Dryer by Commercial Dehydrator Systems, LLC - a professional food dehydration unit built for serious production environments. This stainless steel workhorse features digital controls and multi-speed fan settings, making it ideal for drying fruits, vegetables, herbs, jerky, and more at scale. Retails for significantly more new - an excellent opportunity for food manufacturers and artisan producers. FEATURES: Retail Price: $20,000 • All stainless steel construction - built for commercial food production • Digital temperature display and FutureDesign MCT4 humidity monitor for precise drying control • 4-speed fan selector (Eaton switch) with on/off toggle for optimized airflow • Multiple stainless steel drying trays - front-loading design with secure latch door closure • Rear exhaust vent port and heavy-duty electrical connection • Model R-5A, Serial #22-872 • Manufactured by Commercial Dehydrator Systems, LLC (1-800-369-4283) • Mounted on casters for easy repositioning Includes 14 custom steel trays made specifically to fit this unit. CONDITION: Rated 9/10. The stainless steel exterior shows light surface scuffs and minor cosmetic wear consistent with a commercial production environment, but the unit is in excellent overall shape. The front door latches securely with all four toggle clamps intact. The control panel is clean with both the temperature display and humidity monitor visible. The interior tray slots are clearly visible and in good condition. Drying trays are included (stainless steel solid trays shown). The power cord and plug appear to be in good working order. No dents, rust, or structural damage observed. A very well-maintained commercial dehydration unit ready for continued production use.

Lot of 7 custom-fabricated heavy-duty stainless steel perforated dehydration trays built by Olson Sheet Metal. These commercial-grade trays feature uniform perforations across the entire surface for maximum airflow - ideal for fruit dehydration and food processing operations. Built from premium #304 2B stainless steel, these trays represent serious commercial quality that far exceeds standard off-the-shelf options. Over $1,200 worth of custom metalwork in this single lot. FEATURES: Retail Price: $1,100 (includes all 7 trays in lot) • #304 2B stainless steel food-grade construction • Full perforated surface for superior air circulation during dehydration • Raised lip edges on all four sides for product containment • Custom fabricated by Olson Sheet Metal for commercial food production • Large format approximately 24" x 38" - industrial production size CONDITION: Rated 9/10. These trays are in excellent condition with only very minor surface wear consistent with light commercial use. As seen in photos, the stainless steel surfaces are clean and free of significant scratches, dents, or corrosion. Perforations are uniform and intact throughout. Edges and lips are straight and undamaged. Some very light scuffing visible on the flat stainless borders, but overall these trays present in near-new condition and are fully ready for continued commercial dehydration operations. Stack of all 7 trays visible on pallet.

Lot of 8 custom-fabricated heavy-duty stainless steel perforated dehydration trays built by Olson Sheet Metal. These commercial-grade trays feature uniform perforations across the entire surface for maximum airflow - ideal for fruit dehydration and food processing operations. Built from premium #304 2B stainless steel, these trays represent serious commercial quality that far exceeds standard off-the-shelf options. Over $1,400 worth of custom metalwork in this single lot. FEATURES: Retail Price: $1,400 (includes all 8 trays in lot) • #304 2B stainless steel food-grade construction • Full perforated surface for superior air circulation during dehydration • Raised lip edges on all four sides for product containment • Custom fabricated by Olson Sheet Metal for commercial food production • Large format approximately 24" x 38" - industrial production size CONDITION: Rated 9/10. These trays are in excellent condition with only very minor surface wear consistent with light commercial use. As seen in photos, the stainless steel surfaces are clean and free of significant scratches, dents, or corrosion. Perforations are uniform and intact throughout. Edges and lips are straight and undamaged. Some very light scuffing visible on the flat stainless borders, but overall these trays present in near-new condition and are fully ready for continued commercial dehydration operations. Stack of all 8 trays visible on pallet.

Lot of 12 commercial non-stick dehydrator/oven trays from a food manufacturing facility. These heavy-duty trays feature a black non-stick coated top surface with a bare aluminum/stainless steel underside and raised lip edges - ideal for dehydration, baking, and food production applications. At a fraction of their combined retail value, this is an excellent opportunity for any commercial kitchen or food production operation. FEATURES: Retail Price: $396 • Lot includes 12 commercial-grade trays • Non-stick coated cooking/drying surface • Aluminum/stainless steel construction with raised edges • Approximately 24" x 16" tray size - fits standard commercial racks • Stackable design for efficient storage CONDITION: Rated 9/10. Trays show light use consistent with a commercial food production environment. The non-stick surfaces display minor water spotting and very light surface wear. The aluminum undersides show some minor scratching and scuffing from stacking. No dents, warping, or significant damage observed. Overall in very good working condition with plenty of life remaining.

Seepex BCSO 17-6L progressive cavity pump system includes accessory pieces shown- a serious piece of food-grade pumping equipment ideal for viscous products like fruit purees, sauces, and thick liquids. This unit shows some wear from production use but remains a fully functional, high-value system that retails for nearly $8,000 used. FEATURES: Retail Price: $8,000 • Seepex BCSO 17-6L progressive cavity pump - built 2014, commission no. 838786.2 • Nord Gear SK 22XF-100L/4 CUS gear reducer - 3.00 HP motor, 12.20:1 ratio, 140 RPM output • IronHorse NEMA 4X AC variable frequency drive for precise speed control - 230V rated • Stainless steel sanitary design with tri-clamp connections for easy integration into food production lines • Portable stainless steel cart frame with four swivel casters for easy repositioning • Ideal for pumping fruit purees, pastes, sauces, and other viscous food products CONDITION: Rated 8/10. The pump body shows a scratched and worn blue stator housing with surface scuffs consistent with regular production use. The Nord gear drive and motor housing exhibit paint chipping, surface rust spots, and general grime buildup around fittings. The IronHorse VFD control panel shows dirt and wear marks but the digital display and controls appear intact. The stainless steel cart frame is in solid condition with some surface oxidation. Tri-clamp fittings and sanitary connections appear complete and functional. Overall this is a well-used but serviceable industrial pump system from a working food production environment.

Flux F457 industrial drum pump system with 800W electric motor, stainless steel pump shaft, and a full set of accessories including adapters, couplings, and wrenches. This German-made unit is ideal for food production environments where transferring liquids from drums and containers is required - a serious piece of equipment at a fraction of the retail cost. FEATURES: Retail Price: $3,850 • 800W electric motor - 120V, 60Hz, 7.5A power • Stainless steel pump tube shaft for sanitary food-grade pumping • Includes multiple stainless steel adapters and coupling fittings • Two open-end wrenches for assembly and maintenance • Made in Germany - IP24 rated motor for splash protection CONDITION: Rated 8/10. The motor housing shows normal use wear with some surface grime and minor scuffing on the black casing. The data label is intact and legible. The stainless steel shaft and tube are in good condition with light surface wear. All accessories and fittings appear complete and functional. Power cord is intact. Overall a well-maintained unit from a production environment.

Tippmann RP2SS Roller Press from Tippmann Die Cutting Solutions - a heavy-duty motorized roller press featuring a 3-inch stainless steel roller, complete with extension table connectors for expanded workspace. This unit shows moderate use consistent with a production environment but remains fully intact and functional. FEATURES: Retail Price: $8,800 • 3-inch stainless steel roller for uniform, consistent pressing • Motorized electric operation with illuminated on/off power switch • Dual adjustable control knobs for precise roller gap settings • Includes extension table connectors for additional work surface • Clear polycarbonate safety guard over roller assembly CONDITION: Rated 7/10. The unit shows signs of regular production use. The red powder-coated side housings are intact with minor scuffing and wear. The black steel table surfaces show surface scratching and some wear marks. The stainless steel roller appears in solid working condition. The brand label on the housing shows partial peeling. All adjustment knobs, handles, and the power cord are present and intact. The clear safety shield is in place. Overall a solid, functional production machine with cosmetic wear from use in a food manufacturing environment.

Space Solutions 600PR1820ZWD full-size aluminum sheet pan rack with 20 slots - a workhorse for any bakery, kitchen, or food production line. This unit shows honest commercial use but remains fully functional and structurally solid, offering excellent value against its retail price. FEATURES: Retail Price: $385 • 20-slot capacity for full-size 18" x 26" sheet pans • Welded aluminum frame - lightweight yet durable • NSF certified for commercial foodservice environments • 4 swivel casters for easy rolling and positioning • Open-side design allows quick loading and unloading of pans CONDITION: Rated 8/10. The aluminum frame shows typical signs of commercial use including surface scuffing, minor scratches, and some residue buildup on the slide rails. All welds appear intact and the frame is structurally sound with no bends or warping. All four casters are present and functional. The NSF label is partially worn but still legible. Overall a solid, fully operational rack ready for continued service.

Space Solutions 600PR1820ZWD full-size aluminum sheet pan rack with 20 slots - a workhorse for any bakery, kitchen, or food production line. This unit shows honest commercial use but remains fully functional and structurally solid, offering excellent value against its retail price. FEATURES: Retail Price: $385 • 20-slot capacity for full-size 18" x 26" sheet pans • Welded aluminum frame - lightweight yet durable • NSF certified for commercial foodservice environments • 4 swivel casters for easy rolling and positioning • Open-side design allows quick loading and unloading of pans CONDITION: Rated 8/10. The aluminum frame shows typical signs of commercial use including surface scuffing, minor scratches, and some residue buildup on the slide rails. All welds appear intact and the frame is structurally sound with no bends or warping. All four casters are present and functional. The NSF label is partially worn but still legible. Overall a solid, fully operational rack ready for continued service.

Space Solutions 600PR1820ZWD full-size aluminum sheet pan rack with 20 slots - a workhorse for any bakery, kitchen, or food production line. This unit shows honest commercial use but remains fully functional and structurally solid, offering excellent value against its retail price. FEATURES: Retail Price: $385 • 20-slot capacity for full-size 18" x 26" sheet pans • Welded aluminum frame - lightweight yet durable • NSF certified for commercial foodservice environments • 4 swivel casters for easy rolling and positioning • Open-side design allows quick loading and unloading of pans CONDITION: Rated 8/10. The aluminum frame shows typical signs of commercial use including surface scuffing, minor scratches, and some residue buildup on the slide rails. All welds appear intact and the frame is structurally sound with no bends or warping. All four casters are present and functional. The NSF label is partially worn but still legible. Overall a solid, fully operational rack ready for continued service.

Space Solutions 600PR1820ZWD full-size aluminum sheet pan rack with 20 slots - a workhorse for any bakery, kitchen, or food production line. This unit shows honest commercial use but remains fully functional and structurally solid, offering excellent value against its retail price. FEATURES: Retail Price: $385 • 20-slot capacity for full-size 18" x 26" sheet pans • Welded aluminum frame - lightweight yet durable • NSF certified for commercial foodservice environments • 4 swivel casters for easy rolling and positioning • Open-side design allows quick loading and unloading of pans CONDITION: Rated 8/10. The aluminum frame shows typical signs of commercial use including surface scuffing, minor scratches, and some residue buildup on the slide rails. All welds appear intact and the frame is structurally sound with no bends or warping. All four casters are present and functional. The NSF label is partially worn but still legible. Overall a solid, fully operational rack ready for continued service.

Space Solutions 600PR1820ZWD full-size aluminum sheet pan rack with 20 slots - a workhorse for any bakery, kitchen, or food production line. This unit shows honest commercial use but remains fully functional and structurally solid, offering excellent value against its retail price. FEATURES: Retail Price: $385 • 20-slot capacity for full-size 18" x 26" sheet pans • Welded aluminum frame - lightweight yet durable • NSF certified for commercial foodservice environments • 4 swivel casters for easy rolling and positioning • Open-side design allows quick loading and unloading of pans CONDITION: Rated 8/10. The aluminum frame shows typical signs of commercial use including surface scuffing, minor scratches, and some residue buildup on the slide rails. All welds appear intact and the frame is structurally sound with no bends or warping. All four casters are present and functional. The NSF label is partially worn but still legible. Overall a solid, fully operational rack ready for continued service.

Space Solutions 600PR1820ZWD full-size aluminum sheet pan rack with 20 slots - a workhorse for any bakery, kitchen, or food production line. This unit shows honest commercial use but remains fully functional and structurally solid, offering excellent value against its retail price. FEATURES: Retail Price: $385 • 20-slot capacity for full-size 18" x 26" sheet pans • Welded aluminum frame - lightweight yet durable • NSF certified for commercial foodservice environments • 4 swivel casters for easy rolling and positioning • Open-side design allows quick loading and unloading of pans CONDITION: Rated 8/10. The aluminum frame shows typical signs of commercial use including surface scuffing, minor scratches, and some residue buildup on the slide rails. All welds appear intact and the frame is structurally sound with no bends or warping. All four casters are present and functional. The NSF label is partially worn but still legible. Overall a solid, fully operational rack ready for continued service.

Space Solutions 600PR1820ZWD full-size aluminum sheet pan rack with 20 slots - a workhorse for any bakery, kitchen, or food production line. This unit shows honest commercial use but remains fully functional and structurally solid, offering excellent value against its retail price. FEATURES: Retail Price: $385 • 20-slot capacity for full-size 18" x 26" sheet pans • Welded aluminum frame - lightweight yet durable • NSF certified for commercial foodservice environments • 4 swivel casters for easy rolling and positioning • Open-side design allows quick loading and unloading of pans CONDITION: Rated 8/10. The aluminum frame shows typical signs of commercial use including surface scuffing, minor scratches, and some residue buildup on the slide rails. All welds appear intact and the frame is structurally sound with no bends or warping. All four casters are present and functional. The NSF label is partially worn but still legible. Overall a solid, fully operational rack ready for continued service.

Massive lot of commercial 18 gauge stainless steel dehydrator trays sold as one pallet - approximately 2,500 pounds total. These flat stainless trays were used in a commercial fruit dehydration operation and are stacked four deep on a pallet, representing significant material and functional value. FEATURES: Retail Price: $5,500 • 18 gauge stainless steel construction - heavy-duty commercial grade • Individual tray shear size approximately 17.718" x 23.687" • 4 large stacks on pallet totaling approximately 2,500 lbs • Flat design ideal for dehydrating fruit, jerky, and other foods • Compatible with commercial dehydration some racks and systems - customized for customer's use. CONDITION: Rated 6/10. Trays show moderate use consistent with a commercial food production environment. Surface scratching and scuffing visible across the stainless steel faces. Some trays exhibit water staining, discoloration, and residue marks. Edges show wear. Light mesh separators are visible between some trays in the stacks. Structurally the trays appear intact and functional with no visible warping or major dents. Overall a solid working lot with very minor cosmetic wear from production use.

Massive lot of commercial 18 gauge stainless steel dehydrator trays sold as one pallet - approximately 2,500 pounds total. These flat stainless trays were used in a commercial fruit dehydration operation and are stacked four deep on a pallet, representing significant material and functional value. FEATURES: Retail Price: $5,500 • 18 gauge stainless steel construction - heavy-duty commercial grade • Individual tray shear size approximately 17.718" x 23.687" • 4 large stacks on pallet totaling approximately 2,500 lbs • Flat design ideal for dehydrating fruit, jerky, and other foods • Compatible with commercial dehydration some racks and systems - customized for customer's use. CONDITION: Rated 6/10. Trays show moderate use consistent with a commercial food production environment. Surface scratching and scuffing visible across the stainless steel faces. Some trays exhibit water staining, discoloration, and residue marks. Edges show wear. Light mesh separators are visible between some trays in the stacks. Structurally the trays appear intact and functional with no visible warping or major dents. Overall a solid working lot with very minor cosmetic wear from production use.

Massive lot of commercial 18 gauge stainless steel dehydrator trays sold as one pallet - approximately 2,500 pounds total. These flat stainless trays were used in a commercial fruit dehydration operation and are stacked four deep on a pallet, representing significant material and functional value. FEATURES: Retail Price: $5,500 • 18 gauge stainless steel construction - heavy-duty commercial grade • Individual tray shear size approximately 17.718" x 23.687" • 4 large stacks on pallet totaling approximately 2,500 lbs • Flat design ideal for dehydrating fruit, jerky, and other foods • Compatible with commercial dehydration some racks and systems - customized for customer's use. CONDITION: Rated 6/10. Trays show moderate use consistent with a commercial food production environment. Surface scratching and scuffing visible across the stainless steel faces. Some trays exhibit water staining, discoloration, and residue marks. Edges show wear. Light mesh separators are visible between some trays in the stacks. Structurally the trays appear intact and functional with no visible warping or major dents. Overall a solid working lot with very minor cosmetic wear from production use.

Massive lot of commercial 18 gauge stainless steel dehydrator trays sold as one pallet - approximately 2,500 pounds total. These flat stainless trays were used in a commercial fruit dehydration operation and are stacked four deep on a pallet, representing significant material and functional value. FEATURES: Retail Price: $5,500 • 18 gauge stainless steel construction - heavy-duty commercial grade • Individual tray shear size approximately 17.718" x 23.687" • 4 large stacks on pallet totaling approximately 2,500 lbs • Flat design ideal for dehydrating fruit, jerky, and other foods • Compatible with commercial dehydration some racks and systems - customized for customer's use. CONDITION: Rated 6/10. Trays show moderate use consistent with a commercial food production environment. Surface scratching and scuffing visible across the stainless steel faces. Some trays exhibit water staining, discoloration, and residue marks. Edges show wear. Light mesh separators are visible between some trays in the stacks. Structurally the trays appear intact and functional with no visible warping or major dents. Overall a solid working lot with very minor cosmetic wear from production use.

Massive lot of commercial 18 gauge stainless steel dehydrator trays sold as one pallet - approximately 2,500 pounds total. These flat stainless trays were used in a commercial fruit dehydration operation and are stacked four deep on a pallet, representing significant material and functional value. FEATURES: Retail Price: $5,500 • 18 gauge stainless steel construction - heavy-duty commercial grade • Individual tray shear size approximately 17.718" x 23.687" • 4 large stacks on pallet totaling approximately 2,500 lbs • Flat design ideal for dehydrating fruit, jerky, and other foods • Compatible with commercial dehydration some racks and systems - customized for customer's use. CONDITION: Rated 6/10. Trays show moderate use consistent with a commercial food production environment. Surface scratching and scuffing visible across the stainless steel faces. Some trays exhibit water staining, discoloration, and residue marks. Edges show wear. Light mesh separators are visible between some trays in the stacks. Structurally the trays appear intact and functional with no visible warping or major dents. Overall a solid working lot with very minor cosmetic wear from production use.

Massive lot of commercial 18 gauge stainless steel dehydrator trays sold as one pallet - approximately 2,500 pounds total. These flat stainless trays were used in a commercial fruit dehydration operation and are stacked four deep on a pallet, representing significant material and functional value. FEATURES: Retail Price: $5,500 • 18 gauge stainless steel construction - heavy-duty commercial grade • Individual tray shear size approximately 17.718" x 23.687" • 4 large stacks on pallet totaling approximately 2,500 lbs • Flat design ideal for dehydrating fruit, jerky, and other foods • Compatible with commercial dehydration some racks and systems - customized for customer's use. CONDITION: Rated 6/10. Trays show moderate use consistent with a commercial food production environment. Surface scratching and scuffing visible across the stainless steel faces. Some trays exhibit water staining, discoloration, and residue marks. Edges show wear. Light mesh separators are visible between some trays in the stacks. Structurally the trays appear intact and functional with no visible warping or major dents. Overall a solid working lot with very minor cosmetic wear from production use.

Massive lot of commercial 18 gauge stainless steel dehydrator trays sold as one pallet - approximately 2,500 pounds total. These flat stainless trays were used in a commercial fruit dehydration operation and are stacked four deep on a pallet, representing significant material and functional value. FEATURES: Retail Price: $5,500 • 18 gauge stainless steel construction - heavy-duty commercial grade • Individual tray shear size approximately 17.718" x 23.687" • 4 large stacks on pallet totaling approximately 2,500 lbs • Flat design ideal for dehydrating fruit, jerky, and other foods • Compatible with commercial dehydration some racks and systems - customized for customer's use. CONDITION: Rated 6/10. Trays show moderate use consistent with a commercial food production environment. Surface scratching and scuffing visible across the stainless steel faces. Some trays exhibit water staining, discoloration, and residue marks. Edges show wear. Light mesh separators are visible between some trays in the stacks. Structurally the trays appear intact and functional with no visible warping or major dents. Overall a solid working lot with very minor cosmetic wear from production use.

Dolav MACX solid wall bulk container with matching lid - a heavy-duty, food-grade pallet box ideal for food manufacturing, storage, and material handling. This unit shows light use with minor surface scuffs but remains fully functional and structurally sound, retailing for well over $700 new. Approximately 48" x 40" FEATURES: Retail Price: $715 • Solid wall HDPE (food-grade) construction • Matching snap-on lid included for secure storage • Built-in bottom drain plug for easy cleaning and draining • Four-footed base compatible with forklifts and pallet jacks • Made in USA - designed for heavy-duty industrial and food processing environments CONDITION: Rated 8/10. The container shows light use consistent with a production environment. Exterior walls display minor surface scuffs and light marking (number "97" written on one side). The interior is clean with only minimal wear. The lid fits properly and shows some light surface scratches. The drain plug is intact on one side. All four feet and structural reinforcing ribs are in solid condition with no cracks or warping. Overall a very usable, well-maintained unit.

Lot of 12 commercial aluminum sheet pans paired with 12 matching clear plastic snap-on lids - everything you need for baking, dehydrating, proofing, and food storage. Previously used in a food production environment, these pans and lids still have plenty of life left and represent excellent value versus buying new. FEATURES: Retail Price: $198 • 12 aluminum half-size sheet pans (approximately 18" x 26") • 12 clear plastic snap-on lids for storage and transport • Commercial-grade aluminum construction with rolled edges • Stackable design for easy storage • Compatible with standard commercial oven racks and speed racks CONDITION: Rated 8/10. The aluminum sheet pans show moderate surface scratching and scuffing consistent with regular commercial kitchen use - no warping, dents, or structural damage observed. The clear plastic lids show light scratching and minor cloudiness from use but remain fully functional with intact edges. Some lids have residual label adhesive. All 24 pieces (12 pans + 12 lids) are included and in solid working condition.

Lot of 12 commercial aluminum full-size sheet pans paired with 12 matching clear plastic snap-on lids - a complete set for baking, dehydrating, proofing, and food storage. Previously used in a food production environment, these pans and lids still have plenty of life left and represent excellent value versus buying new. FEATURES: Retail Price: $198 • 12 aluminum full-size sheet pans (approximately 18" x 26") • 12 clear plastic snap-on lids for storage and transport • Commercial-grade aluminum construction with rolled edges • Stackable design for easy storage • Compatible with standard commercial oven racks and speed racks CONDITION: Rated 8/10. The aluminum sheet pans show moderate surface scratching and scuffing consistent with regular commercial kitchen use - no warping, dents, or structural damage observed. The "Choice" brand logo is visible stamped on the pans. The clear plastic lids show light scratching and minor cloudiness from use but remain fully functional with intact edges. Some lids have residual green label adhesive. All 24 pieces (12 pans + 12 lids) are included and in solid working condition.

Lot of 12 commercial aluminum full-size sheet pans paired with 12 matching clear plastic snap-on lids - a complete set for baking, dehydrating, proofing, and food storage. Previously used in a food production environment, these pans and lids still have plenty of life left and represent excellent value versus buying new. FEATURES: Retail Price: $198 • 12 aluminum full-size sheet pans (approximately 18" x 26") • 12 clear plastic snap-on lids for storage and transport • Commercial-grade aluminum construction with rolled edges • Stackable design for easy storage • Compatible with standard commercial oven racks and speed racks CONDITION: Rated 8/10. The aluminum sheet pans show moderate surface scratching and scuffing consistent with regular commercial kitchen use - no warping, dents, or structural damage observed. The "Choice" brand logo is visible stamped on the pans. The clear plastic lids show light scratching and minor cloudiness from use but remain fully functional with intact edges. Some lids have residual green label adhesive. All 24 pieces (12 pans + 12 lids) are included and in solid working condition.

Lot of 12 commercial aluminum full-size sheet pans paired with 12 matching clear plastic snap-on lids - a complete set for baking, dehydrating, proofing, and food storage. Previously used in a food production environment, these pans and lids still have plenty of life left and represent excellent value versus buying new. FEATURES: Retail Price: $198 • 12 aluminum full-size sheet pans (approximately 18" x 26") • 12 clear plastic snap-on lids for storage and transport • Commercial-grade aluminum construction with rolled edges • Stackable design for easy storage • Compatible with standard commercial oven racks and speed racks CONDITION: Rated 8/10. The aluminum sheet pans show moderate surface scratching and scuffing consistent with regular commercial kitchen use - no warping, dents, or structural damage observed. The "Choice" brand logo is visible stamped on the pans. The clear plastic lids show light scratching and minor cloudiness from use but remain fully functional with intact edges. Some lids have residual green label adhesive. All 24 pieces (12 pans + 12 lids) are included and in solid working condition.

Lot of 12 commercial aluminum full-size sheet pans paired with 12 matching clear plastic snap-on lids - a complete set for baking, dehydrating, proofing, and food storage. Previously used in a food production environment, these pans and lids still have plenty of life left and represent excellent value versus buying new. FEATURES: Retail Price: $198 • 12 aluminum full-size sheet pans (approximately 18" x 26") • 12 clear plastic snap-on lids for storage and transport • Commercial-grade aluminum construction with rolled edges • Stackable design for easy storage • Compatible with standard commercial oven racks and speed racks CONDITION: Rated 8/10. The aluminum sheet pans show moderate surface scratching and scuffing consistent with regular commercial kitchen use - no warping, dents, or structural damage observed. The "Choice" brand logo is visible stamped on the pans. The clear plastic lids show light scratching and minor cloudiness from use but remain fully functional with intact edges. Some lids have residual green label adhesive. All 24 pieces (12 pans + 12 lids) are included and in solid working condition.

Lot of 12 commercial aluminum full-size sheet pans paired with 12 matching clear plastic snap-on lids - a complete set for baking, dehydrating, proofing, and food storage. Previously used in a food production environment, these pans and lids still have plenty of life left and represent excellent value versus buying new. FEATURES: Retail Price: $198 • 12 aluminum full-size sheet pans (approximately 18" x 26") • 12 clear plastic snap-on lids for storage and transport • Commercial-grade aluminum construction with rolled edges • Stackable design for easy storage • Compatible with standard commercial oven racks and speed racks CONDITION: Rated 8/10. The aluminum sheet pans show moderate surface scratching and scuffing consistent with regular commercial kitchen use - no warping, dents, or structural damage observed. The "Choice" brand logo is visible stamped on the pans. The clear plastic lids show light scratching and minor cloudiness from use but remain fully functional with intact edges. Some lids have residual green label adhesive. All 24 pieces (12 pans + 12 lids) are included and in solid working condition.

Lot of 12 commercial aluminum full-size sheet pans paired with 12 matching clear plastic snap-on lids - a complete set for baking, dehydrating, proofing, and food storage. Previously used in a food production environment, these pans and lids still have plenty of life left and represent excellent value versus buying new. FEATURES: Retail Price: $198 • 12 aluminum full-size sheet pans (approximately 18" x 26") • 12 clear plastic snap-on lids for storage and transport • Commercial-grade aluminum construction with rolled edges • Stackable design for easy storage • Compatible with standard commercial oven racks and speed racks CONDITION: Rated 8/10. The aluminum sheet pans show moderate surface scratching and scuffing consistent with regular commercial kitchen use - no warping, dents, or structural damage observed. The "Choice" brand logo is visible stamped on the pans. The clear plastic lids show light scratching and minor cloudiness from use but remain fully functional with intact edges. Some lids have residual green label adhesive. All 24 pieces (12 pans + 12 lids) are included and in solid working condition.

Lot of 12 commercial aluminum full-size sheet pans paired with 12 matching clear plastic snap-on lids - a complete set for baking, dehydrating, proofing, and food storage. Previously used in a food production environment, these pans and lids still have plenty of life left and represent excellent value versus buying new. FEATURES: Retail Price: $198 • 12 aluminum full-size sheet pans (approximately 18" x 26") • 12 clear plastic snap-on lids for storage and transport • Commercial-grade aluminum construction with rolled edges • Stackable design for easy storage • Compatible with standard commercial oven racks and speed racks CONDITION: Rated 8/10. The aluminum sheet pans show moderate surface scratching and scuffing consistent with regular commercial kitchen use - no warping, dents, or structural damage observed. The "Choice" brand logo is visible stamped on the pans. The clear plastic lids show light scratching and minor cloudiness from use but remain fully functional with intact edges. Some lids have residual green label adhesive. All 24 pieces (12 pans + 12 lids) are included and in solid working condition.

Lot of 12 commercial aluminum full-size sheet pans paired with 12 matching clear plastic snap-on lids - a complete set for baking, dehydrating, proofing, and food storage. Previously used in a food production environment, these pans and lids still have plenty of life left and represent excellent value versus buying new. FEATURES: Retail Price: $198 • 12 aluminum full-size sheet pans (approximately 18" x 26") • 12 clear plastic snap-on lids for storage and transport • Commercial-grade aluminum construction with rolled edges • Stackable design for easy storage • Compatible with standard commercial oven racks and speed racks CONDITION: Rated 8/10. The aluminum sheet pans show moderate surface scratching and scuffing consistent with regular commercial kitchen use - no warping, dents, or structural damage observed. The "Choice" brand logo is visible stamped on the pans. The clear plastic lids show light scratching and minor cloudiness from use but remain fully functional with intact edges. Some lids have residual green label adhesive. All 24 pieces (12 pans + 12 lids) are included and in solid working condition.

Lot of 12 commercial aluminum full-size sheet pans paired with 12 matching clear plastic snap-on lids - a complete set for baking, dehydrating, proofing, and food storage. Previously used in a food production environment, these pans and lids still have plenty of life left and represent excellent value versus buying new. FEATURES: Retail Price: $198 • 12 aluminum full-size sheet pans (approximately 18" x 26") • 12 clear plastic snap-on lids for storage and transport • Commercial-grade aluminum construction with rolled edges • Stackable design for easy storage • Compatible with standard commercial oven racks and speed racks CONDITION: Rated 8/10. The aluminum sheet pans show moderate surface scratching and scuffing consistent with regular commercial kitchen use - no warping, dents, or structural damage observed. The "Choice" brand logo is visible stamped on the pans. The clear plastic lids show light scratching and minor cloudiness from use but remain fully functional with intact edges. Some lids have residual green label adhesive. All 24 pieces (12 pans + 12 lids) are included and in solid working condition.

Lot of 12 commercial aluminum full-size sheet pans paired with 12 matching clear plastic snap-on lids - a complete set for baking, dehydrating, proofing, and food storage. Previously used in a food production environment, these pans and lids still have plenty of life left and represent excellent value versus buying new. FEATURES: Retail Price: $198 • 12 aluminum full-size sheet pans (approximately 18" x 26") • 12 clear plastic snap-on lids for storage and transport • Commercial-grade aluminum construction with rolled edges • Stackable design for easy storage • Compatible with standard commercial oven racks and speed racks CONDITION: Rated 8/10. The aluminum sheet pans show moderate surface scratching and scuffing consistent with regular commercial kitchen use - no warping, dents, or structural damage observed. The "Choice" brand logo is visible stamped on the pans. The clear plastic lids show light scratching and minor cloudiness from use but remain fully functional with intact edges. Some lids have residual green label adhesive. All 24 pieces (12 pans + 12 lids) are included and in solid working condition.

Lot of 11 commercial aluminum full-size sheet pans with 11 matching translucent plastic snap-on lids - a versatile staple for any commercial kitchen or food production operation. These pans show honest use from a food manufacturing environment but have plenty of life left. FEATURES: Retail Price: $242 • 11 full-size aluminum sheet pans (approximately 18" x 26") • 11 matching translucent plastic snap-on lids for storage and transport • Rimmed edges for secure handling and easy stacking • Commercial-grade aluminum construction for even heat distribution • Suitable for baking, food prep, dehydration, cooling, and storage CONDITION: Pans show typical signs of commercial use - surface scratching, minor discoloration, and some darkened spots along edges consistent with regular kitchen use. No significant dents or warping observed. The plastic lids appear to be in good condition with minimal wear and remain clear and functional. Overall a solid 8/10 - these are well-used but fully functional commercial sheet pans ready for continued service.

Lot of 11 commercial aluminum full-size sheet pans - a kitchen workhorse essential for any bakery, restaurant, or food production facility. These pans show typical commercial use with surface scratching and patina but remain fully functional and structurally sound. At retail, replacing this many sheet pans adds up quickly. FEATURES: Retail Price: $220 • Lot includes 11 full-size aluminum sheet pans • Standard commercial 18" x 26" full-size dimensions • Rolled rim edges for added strength and safe handling • Heavy-duty aluminum construction for even heat distribution • Stackable design for efficient storage CONDITION: Rated 8/10. These sheet pans show normal commercial kitchen wear including surface scratches, scuffing, and some discoloration/patina on the aluminum surfaces consistent with regular use in a food production environment. All pans are structurally intact with no visible dents, warping, or bent rims. Edges and rolled rims are in good shape. Fully functional and ready for continued service. Bid X 11

Lot of 12 commercial aluminum full-size sheet pans from a food production facility. These pans show typical commercial kitchen use with surface scratching and minor discoloration, but remain fully functional and structurally sound - a great value versus buying new. FEATURES: Retail Price: $198 • Lot includes 12 full-size aluminum sheet pans • Commercial-grade aluminum construction • Standard full-size dimensions (approximately 18" x 26") • Raised rim edges on all sides for secure handling • Stackable design for efficient storage CONDITION: Rated 8/10. These sheet pans show normal wear consistent with commercial kitchen use. Surface scratching and light scuffing visible across the pan faces. Some minor discoloration and patina from repeated use and washing. No significant dents, warping, or structural damage observed. Rims and edges appear intact. All 12 pans are in solid, usable working condition. Bid X 12

Lot of 12 commercial aluminum full-size sheet pans from a food production facility. These pans show typical commercial kitchen use with surface scratching and minor discoloration, but remain fully functional and structurally sound - a great value versus buying new. FEATURES: Retail Price: $198 • Lot includes 12 full-size aluminum sheet pans • Commercial-grade aluminum construction • Standard full-size dimensions (approximately 18" x 26") • Raised rim edges on all sides for secure handling • Stackable design for efficient storage CONDITION: Rated 8/10. These sheet pans show normal wear consistent with commercial kitchen use. Surface scratching and light scuffing visible across the pan faces. Some minor discoloration and patina from repeated use and washing. No significant dents, warping, or structural damage observed. Rims and edges appear intact. All 12 pans are in solid, usable working condition. Bid X 12

Lot of 12 commercial aluminum full-size sheet pans from a food production facility. These pans show typical commercial kitchen use with surface scratching and minor discoloration, but remain fully functional and structurally sound - a great value versus buying new. FEATURES: Retail Price: $198 • Lot includes 12 full-size aluminum sheet pans • Commercial-grade aluminum construction • Standard full-size dimensions (approximately 18" x 26") • Raised rim edges on all sides for secure handling • Stackable design for efficient storage CONDITION: Rated 8/10. These sheet pans show normal wear consistent with commercial kitchen use. Surface scratching and light scuffing visible across the pan faces. Some minor discoloration and patina from repeated use and washing. No significant dents, warping, or structural damage observed. Rims and edges appear intact. All 12 pans are in solid, usable working condition. Bid X 12

Lot of 12 Chicago Metallic full-size aluminum sheet pans - a commercial bakery essential from the Peaceful Fruits production facility. These pans show moderate use consistent with a working food manufacturing environment but remain fully functional with no warping or structural damage. FEATURES: Retail Price: $198 • Lot of 12 commercial full-size sheet pans (18" x 26") • Made by Chicago Metallic - an industry-leading bakeware manufacturer • Heavy-duty aluminum construction for even heat distribution • Reinforced rolled rim edges for strength and warp resistance • Stackable design - ideal for use with sheet pan racks CONDITION: Rated 8/10. These pans show typical signs of commercial kitchen use including light surface discoloration, minor staining, and some scratching across the flat surfaces. The rolled edges are intact with no significant dents or bending. No warping observed - pans stack evenly and sit flat. All 12 pans are structurally sound and ready for continued commercial use.

Lot of 12 Chicago Metallic full-size aluminum sheet pans - a commercial bakery essential from the Peaceful Fruits production facility. These pans show moderate use consistent with a working food manufacturing environment but remain fully functional with no warping or structural damage. FEATURES: Retail Price: $198 • Lot of 12 commercial full-size sheet pans (18" x 26") • Made by Chicago Metallic - an industry-leading bakeware manufacturer • Heavy-duty aluminum construction for even heat distribution • Reinforced rolled rim edges for strength and warp resistance • Stackable design - ideal for use with sheet pan racks CONDITION: Rated 8/10. These pans show typical signs of commercial kitchen use including light surface discoloration, minor staining, and some scratching across the flat surfaces. The rolled edges are intact with no significant dents or bending. No warping observed - pans stack evenly and sit flat. All 12 pans are structurally sound and ready for continued commercial use.

Lot of 12 Chicago Metallic full-size aluminum sheet pans - a commercial bakery essential from the Peaceful Fruits production facility. These pans show moderate use consistent with a working food manufacturing environment but remain fully functional with no warping or structural damage. FEATURES: Retail Price: $198 • Lot of 12 commercial full-size sheet pans (18" x 26") • Made by Chicago Metallic - an industry-leading bakeware manufacturer • Heavy-duty aluminum construction for even heat distribution • Reinforced rolled rim edges for strength and warp resistance • Stackable design - ideal for use with sheet pan racks CONDITION: Rated 8/10. These pans show typical signs of commercial kitchen use including light surface discoloration, minor staining, and some scratching across the flat surfaces. The rolled edges are intact with no significant dents or bending. No warping observed - pans stack evenly and sit flat. All 12 pans are structurally sound and ready for continued commercial use.

Lot of 12 Chicago Metallic full-size aluminum sheet pans - a commercial bakery essential from the Peaceful Fruits production facility. These pans show moderate use consistent with a working food manufacturing environment but remain fully functional with no warping or structural damage. FEATURES: Retail Price: $198 • Lot of 12 commercial full-size sheet pans (18" x 26") • Made by Chicago Metallic - an industry-leading bakeware manufacturer • Heavy-duty aluminum construction for even heat distribution • Reinforced rolled rim edges for strength and warp resistance • Stackable design - ideal for use with sheet pan racks CONDITION: Rated 8/10. These pans show typical signs of commercial kitchen use including light surface discoloration, minor staining, and some scratching across the flat surfaces. The rolled edges are intact with no significant dents or bending. No warping observed - pans stack evenly and sit flat. All 12 pans are structurally sound and ready for continued commercial use.

Lot of 12 Chicago Metallic full-size aluminum sheet pans - a commercial bakery essential from the Peaceful Fruits production facility. These pans show moderate use consistent with a working food manufacturing environment but remain fully functional with no warping or structural damage. FEATURES: Retail Price: $198 • Lot of 12 commercial full-size sheet pans (18" x 26") • Made by Chicago Metallic - an industry-leading bakeware manufacturer • Heavy-duty aluminum construction for even heat distribution • Reinforced rolled rim edges for strength and warp resistance • Stackable design - ideal for use with sheet pan racks CONDITION: Rated 8/10. These pans show typical signs of commercial kitchen use including light surface discoloration, minor staining, and some scratching across the flat surfaces. The rolled edges are intact with no significant dents or bending. No warping observed - pans stack evenly and sit flat. All 12 pans are structurally sound and ready for continued commercial use.

Lot of 12 Chicago Metallic full-size aluminum sheet pans - a commercial bakery essential from the Peaceful Fruits production facility. These pans show moderate use consistent with a working food manufacturing environment but remain fully functional with no warping or structural damage. FEATURES: Retail Price: $198 • Lot of 12 commercial full-size sheet pans (18" x 26") • Made by Chicago Metallic - an industry-leading bakeware manufacturer • Heavy-duty aluminum construction for even heat distribution • Reinforced rolled rim edges for strength and warp resistance • Stackable design - ideal for use with sheet pan racks CONDITION: Rated 8/10. These pans show typical signs of commercial kitchen use including light surface discoloration, minor staining, and some scratching across the flat surfaces. The rolled edges are intact with no significant dents or bending. No warping observed - pans stack evenly and sit flat. All 12 pans are structurally sound and ready for continued commercial use.

Lot of 12 Chicago Metallic full-size aluminum sheet pans - a commercial bakery essential from the Peaceful Fruits production facility. These pans show moderate use consistent with a working food manufacturing environment but remain fully functional with no warping or structural damage. FEATURES: Retail Price: $198 • Lot of 12 commercial full-size sheet pans (18" x 26") • Made by Chicago Metallic - an industry-leading bakeware manufacturer • Heavy-duty aluminum construction for even heat distribution • Reinforced rolled rim edges for strength and warp resistance • Stackable design - ideal for use with sheet pan racks CONDITION: Rated 8/10. These pans show typical signs of commercial kitchen use including light surface discoloration, minor staining, and some scratching across the flat surfaces. The rolled edges are intact with no significant dents or bending. No warping observed - pans stack evenly and sit flat. All 12 pans are structurally sound and ready for continued commercial use.

Lot of 12 Chicago Metallic full-size aluminum sheet pans - a commercial bakery essential from the Peaceful Fruits production facility. These pans show moderate use consistent with a working food manufacturing environment but remain fully functional with no warping or structural damage. FEATURES: Retail Price: $198 • Lot of 12 commercial full-size sheet pans (18" x 26") • Made by Chicago Metallic - an industry-leading bakeware manufacturer • Heavy-duty aluminum construction for even heat distribution • Reinforced rolled rim edges for strength and warp resistance • Stackable design - ideal for use with sheet pan racks CONDITION: Rated 8/10. These pans show typical signs of commercial kitchen use including light surface discoloration, minor staining, and some scratching across the flat surfaces. The rolled edges are intact with no significant dents or bending. No warping observed - pans stack evenly and sit flat. All 12 pans are structurally sound and ready for continued commercial use.

Lot of 12 Chicago Metallic full-size aluminum sheet pans - a commercial bakery essential from the Peaceful Fruits production facility. These pans show moderate use consistent with a working food manufacturing environment but remain fully functional with no warping or structural damage. FEATURES: Retail Price: $198 • Lot of 12 commercial full-size sheet pans (18" x 26") • Made by Chicago Metallic - an industry-leading bakeware manufacturer • Heavy-duty aluminum construction for even heat distribution • Reinforced rolled rim edges for strength and warp resistance • Stackable design - ideal for use with sheet pan racks CONDITION: Rated 8/10. These pans show typical signs of commercial kitchen use including light surface discoloration, minor staining, and some scratching across the flat surfaces. The rolled edges are intact with no significant dents or bending. No warping observed - pans stack evenly and sit flat. All 12 pans are structurally sound and ready for continued commercial use.