Chick- Fil-A Waste Equipment Auction

Mil-tek Model 205 TS vertical baler compactor with EcoDrive system. This pneumatic-powered unit is designed for compacting cardboard, plastic, and other recyclable materials into manageable bales. Unit shows signs of regular commercial use with cosmetic wear throughout. FEATURES: Retail Price: $13,200 • Pneumatic (compressed air) powered - no electrical motor required • EcoDrive energy-efficient compaction system • Built-in dual bale strapping spools with integrated threading system • Heavy-duty steel construction with front-loading swing door • Compact vertical design for space-efficient waste management CONDITION: Rated 7/10. The blue painted steel exterior shows moderate wear including paint chipping, scuffs, and scratches consistent with commercial use. Visible rust is present along the bottom edges of the interior chamber and at the base of the unit. The front door hinges and latches appear intact and functional. The strapping system is equipped with twine spools. The pneumatic cylinder and guide rods on top show surface wear but appear structurally sound. The air supply connection hose is visible on the side. Warning and service labels are present but some show wear. Overall a solid working unit with cosmetic blemishes from regular operation.

Mil-tek XP 200/RF L pneumatic waste compactor, serial number 201690, manufactured in 2017 in Denmark. This air-powered compactor features a round stainless steel compaction chamber on a mobile caster base. The unit shows significant wear consistent with regular commercial use, including surface oxidation, scuffing, and general aging throughout. FEATURES: Retail Price: $13,200 • Pneumatic air-powered operation - no electrical connection needed • 160 PSI design pressure / 116 PSI operating pressure • 1 x 5 gallon cubic content capacity • Stainless steel round compaction chamber with safety latch • Mobile base with casters for easy repositioning • CE and GS certified, ANSI Z245.21-2008 compliant CONDITION: Unit shows moderate to heavy wear consistent with its 2017 build date and years of commercial service. The stainless steel exterior exhibits widespread surface oxidation, scratches, and scuffing throughout the body and compaction chamber. The Mil-tek logo and branding on the front are faded but legible. Warning labels are present but worn. The latch mechanism on the chamber lid shows some corrosion. The pneumatic cylinder and guide rods appear intact but show age-related wear. The caster base has visible dirt and grime accumulation. All major structural components appear present and the unit is structurally sound, though cosmetic condition reflects extended use. Rated 5/10.

Manual winch-operated platform lift cart with a rated load capacity of 150 kg / 330 lbs as shown on the capacity plate at the top of the mast. This unit features a hand crank winch with chain drive to raise and lower the flat platform, mounted on caster wheels for mobility around a facility. FEATURES: Retail Price: $1,320 • Manual hand winch with chain-driven lift mechanism • 330 lb (150 kg) rated load capacity clearly labeled on unit • Steel frame construction with flat platform base • Ergonomic tubular handle grips for maneuvering • Heavy-duty wheels including large rear wheels and front swivel casters CONDITION: Unit shows moderate wear consistent with regular commercial use. Steel frame and mast exhibit surface scratches, scuffing, and areas of paint wear throughout. The platform shows visible surface wear and some edge rust. The winch mechanism and chain appear intact and functional. Wheels show wear but remain operational. Some minor surface corrosion is visible on lower components. Overall the unit is structurally sound but cosmetically worn - rated 6/10.

Husky 20-gallon quiet air compressor, model 3332013, produced in November 2024. The unit is a vertical-style portable compressor on wheels with a silver/gray finish. It shows signs of use including light scuffing and surface wear on the tank body, but all gauges, regulator knob, and quick-connect couplers appear intact. FEATURES: Retail Price: $384 • 20-gallon (75.7L) vertical tank with 165 max PSI • 1.5 HP motor rated at 1700 RPM • Up to 80% quieter than standard compressors • 4.0 SCFM at 90 PSI / 5.0 SCFM at 40 PSI • 120V/11A/60Hz - plugs into standard household outlet • Dual gauges for tank and regulated pressure • Portable design with integrated handle and wheels • ETL listed - conforms to UL STD. 1450 CONDITION: Unit is in used condition consistent with a 7/10 rating. The silver tank exterior shows light scuffing, minor surface marks, and some dust accumulation. The control panel with tank gauge, regulator knob, and tool gauge all appear present and intact. Power cord is attached and visible. Wheels and handle are in functional condition. Produced in 2024, so this is a relatively recent unit. No visible dents or significant damage noted.