CLE Restaurant Equipment Sell Off! PART 3

Brand new Italforni TSB GAS stone conveyor pizza oven, still on the original shipping pallet with factory foam packaging, protective film on stainless steel panels, and strapping intact. This unit was manufactured on 10/25/2024 and has never been installed or used. The stone conveyor baking deck is visible and in pristine condition. FEATURES: Retail Price: $30,800 • Gas-fired stone conveyor oven - 120,000 BTU/hr input rating (Natural Gas or Propane compatible) • Ceramic/refractory stone conveyor belt for authentic stone-baked pizza and flatbreads • Dart Micro-Drive digital conveyor speed controller for precise bake time adjustment • Dual Novus N480D digital temperature controllers with independent top and bottom heat zones • Built-in safety features including gas reset, over-temperature protection, emergency stop, and cooling fans • Full stainless steel construction - ETL listed, NSF 4 certified, CSA 1.8 certified • 110V / 1-Phase / 60Hz electrical requirement (120 Watts) - easy plug-in operation • Serial Number: 68260 - Date of Manufacture: October 25, 2024 CONDITION: BRAND NEW - Factory sealed, never used, never installed. Original shipping pallet, foam packing, protective plastic film on stainless panels, and factory strapping all intact. Stone conveyor deck is clean and unscratched. Control panel shows no marks or wear. All caution labels and spec plates are present and legible. Manufactured less than one year ago.

Kool-It Signature KBSF-2 two-door commercial reach-in freezer manufactured in September 2021. This unit is a full-size stainless steel freezer on casters, showing moderate use with visible surface wear on the exterior panels and interior shelving has been removed. FEATURES: Retail Price: $4,620 • Two solid stainless steel self-closing doors with recessed handles • Bottom-mounted compressor using R-290 environmentally friendly refrigerant • 115V/60Hz/1PH operation at 4.6 amps - plugs into standard outlet • 600W defrost system for efficient frost management • Full stainless steel interior with adjustable shelf pilaster strips visible • Digital temperature control panel on top front • Mobile on commercial-grade casters CONDITION: Unit is rated 5/10. The stainless steel exterior doors show moderate scratching and scuffing consistent with commercial kitchen use. The interior is clean but all shelving has been removed - none are visible or included. The back panel shows scuff marks and minor cosmetic damage. The bottom compressor area and condenser coil appear intact. Door gaskets show some wear with black rubber seals visible. The unit was manufactured in September 2021. Operational status has not been verified - buyer should inspect at preview.

Brand new OperaPrima OP-42 Pizza/Mozzarella Shaper, complete with user and maintenance manual. This commercial-grade shaper is manufactured by Ecor International under the OperaPrima brand and is designed to replicate the hand-shaping technique of a traditional pizzaiolo. Never used, still in original packaging with all documentation included. FEATURES: Retail Price: $19,800 • Commercial mozzarella and pizza dough shaper - "Like a Pizzaiolo" • Machine Type OP-42 manufactured by Ecor International • 220V / 50Hz electrical - 0.12 Kw absorbed power, 1.2A nominal current • 24 Vdc auxiliary voltage for operator safety • Approximately 130 Kg (286 lbs) heavy-duty construction • CE certified for commercial use • Includes original user and maintenance manual CONDITION: BRAND NEW - Factory fresh, never used. Original user and maintenance manual is present and in pristine condition. No signs of wear, use, or installation. Unit appears to be complete with all original documentation and packaging materials. Rated 10/10.

Brand new E.T.A. S.r.l. mozzarella stretching and forming machine, still in original wooden crate packaging. This Italian-manufactured unit by E.T.A. (Engineering Tecnologie Agroalimentari) is designed for commercial cheese production - stretching, kneading, and forming mozzarella and pasta filata-style cheeses. Unit has never been installed or used and retains all protective wrapping. FEATURES: Retail Price: $49,500 • Full stainless steel sanitary construction throughout • ABB variable frequency drive in enclosed stainless control cabinet with key lock • Operator control panel with emergency stop button, multiple selector switches, and illuminated push buttons • Includes assorted interchangeable forming dies, auger screws, and accessories (visible in crate) • Hinged top-loading hopper with slotted ventilation lid for product input • Integrated product output chute with sanitary tri-clamp fittings • Hazardous voltage safety labels and warning placards installed CONDITION: BRAND NEW - Never installed or used. Still in original wooden shipping crate with protective plastic wrapping intact. All stainless steel surfaces are clean and free of scratches, dents, or blemishes. Complete with multiple forming attachments, dies, auger components, and hardware packed separately in the crate. Control panel is pristine with all switches, buttons, and key lock in factory-new condition. ABB drive enclosure is sealed and untouched.

Brand new Franke dual sided, dual lane hot holding table with digital controls, model/part number 18023539. This unit is still covered in protective Nitto film and has never been installed or used. The label identifies it as "Table, Hot, Dual Sided, Dual Lane w/Digital" dated 2022-03-24. Shipped on skid 1 of 4 - includes the main multi-tier holding station and numerous stainless steel accessory components. FEATURES: Retail Price: $9,350 • Dual sided, dual lane heated holding configuration • Digital temperature controls with LED readout displays (upper and lower holding zones visible) • Heavy-duty all stainless steel construction throughout • Multiple heated holding tiers with wire rack shelving • Includes numerous stainless steel mounting brackets, trays, and accessory components CONDITION: BRAND NEW - Never installed or used. Factory protective Nitto film still intact on stainless steel panels. All components appear complete with original labeling still attached. Unit is partially assembled with additional loose components and accessories present. No scratches, dents, or wear observed on any surfaces beneath the protective film. Dated 2022-03-24 per factory label.

Hobart commercial gas upright broiler mounted on a Hobart open equipment stand with casters. This unit shows heavy use with significant grease buildup, surface rust on the top and interior grates, and general wear consistent with years of commercial kitchen service. The lower storage area contains removable grill grates and a cleaning brush. FEATURES: Retail Price: $9,350 • Heavy-duty stainless steel exterior construction • Gas-fired upright broiler with front-loading pull-out drawer • Adjustable burner controls via front-mounted knobs • Mounted on Hobart open base equipment stand with casters for mobility • Includes removable grill grates and grease drip tray CONDITION: Unit is rated 5/10 and shows significant signs of heavy commercial use. The top surface has visible rust and discoloration. Interior grill grates show rust and heavy carbon buildup. The stainless steel front panels have grease staining and surface scratches throughout. The rear panel shows streaked grease stains and minor scratches. The lower base stand has accumulated grease and the storage area contains loose grates and a cleaning brush. Control knobs are present and intact. Unit is on casters and appears structurally sound despite cosmetic wear. Functionality has not been verified - sold as-is.

Tizo Ovens (J.T. Restaurant Solutions) Model 108-B-30 commercial charcoal rotisserie oven on casters. This is a heavy-duty, stainless steel charcoal-fired rotisserie unit showing clear signs of regular use with charcoal and ash residue visible in the cooking chamber. Serial number 1956005009, made in Peru. FEATURES: Retail Price: $19,800 • Charcoal-fired rotisserie oven - authentic wood/charcoal cooking • Full stainless steel exterior construction • NSF certified for commercial foodservice use • Chain-driven rotisserie motor with on/off switch and indicator light • Mounted on heavy-duty locking casters for mobility • Lower storage cabinet with front access doors and drawers • Large open cooking chamber with flip-up hood CONDITION: Unit is rated 5/10. The cooking chamber shows heavy use with significant charcoal residue, ash buildup, and carbon deposits throughout the interior. The stainless steel exterior has discoloration, grease staining, and surface wear, particularly around the hood and front face. The branded glass/panel on the hood shows heat discoloration and soot buildup. The chain-drive rotisserie mechanism on the left side is visible and appears intact. On/off switch and indicator light are present on the control panel. Casters appear functional. Overall, this unit has been well-used in a commercial kitchen environment and would benefit from a thorough cleaning. Buyer should verify all mechanical and electrical components at preview.

Delfield TT2-1422 mobile dual tray dispenser cart in used condition. This stainless steel unit features two spring-loaded tray columns designed for 14" x 22" trays, mounted on a mobile caster base. The unit shows cosmetic wear consistent with regular commercial use but remains structurally sound. FEATURES: Retail Price: $3,080 • Dual-stack spring-loaded tray dispenser platforms • All stainless steel construction throughout • Four swivel casters for easy maneuverability • Accepts standard 14" x 22" cafeteria/serving trays • NSF certified - Made in USA by Delfield (Manitowoc) CONDITION: Rated 8/10. Stainless steel surfaces show moderate wear including scratching, scuffing, and some discoloration on the tray platforms. The lower shelf still has protective film partially attached. Tubular frame rails show surface grime and light oxidation in spots. All four casters are present and appear functional. Spring-loaded platforms are intact on both sides. Overall the unit is structurally solid with cosmetic wear from regular commercial kitchen use.

Maxx Cold MCR-23GD single glass door reach-in commercial refrigerator. This unit shows moderate wear consistent with regular commercial kitchen use, including scratching and scuffing on the stainless steel exterior. The interior contains three adjustable wire shelves and the digital control panel is visible at the top of the unit. FEATURES: Retail Price: $3,080 • Single full-length glass door for easy product visibility • Digital temperature control with front-mounted display • Stainless steel interior and exterior construction • Three adjustable epoxy-coated wire shelves • Bottom-mount self-contained refrigeration system - R-134a refrigerant • 115V / 60Hz / Single Phase - 6.5 Amps • Mounted on casters for easy mobility • ETL/NSF certified CONDITION: Rated 5/10. The stainless steel exterior shows noticeable scratching and wear marks throughout, particularly around the door frame and lower kick plate area. The glass door appears intact with no cracks. Interior shelves are present but show some surface discoloration and wear. The gasket seal around the door shows age. The digital control panel appears functional with a visible readout. Unit is on casters. Manufactured in 2015 per the data plate (date code 15.04). Operational status is not confirmed - buyer should inspect during preview.

Vulcan 1GR45M-1 natural gas floor fryer rated at 120,000 BTU/hr. This unit has been heavily used and shows significant wear including grease buildup, surface rust and staining on the exterior panels, and residue throughout the burner compartment and fry pot area. Serial number DV11400083. FEATURES: Retail Price: $1,210 • Natural gas operation at 120,000 BTU/hr • 45-50 lb. oil capacity single fry pot • Millivolt thermostat controls - no electrical hookup needed • Stainless steel construction with front-mounted temperature dial • Floor model on casters for easy positioning CONDITION: Rated 5/10. This fryer shows heavy use throughout. The exterior stainless steel panels have significant grease staining, discoloration, and surface rust - particularly on the left side and rear panels. The fry pot interior is darkened with heavy carbon and grease buildup along the upper edges. The burner tubes are intact but coated in residue. The lower burner compartment has substantial grease accumulation on the base plate and around the gas valve assembly. The temperature control knob and drain valve with red handle are present. Unit is mounted on casters. The backsplash area shows carbon buildup and wear. This fryer will require thorough cleaning and should be professionally inspected before use.

Alto-Shaam ED2-72 heated display case on casters showing heavy use and significant cosmetic wear. The unit features a curved glass canopy over multiple food pan wells, but the exterior panels are chipped and scratched, glass is dirty, and the overall condition reflects years of commercial service. FEATURES: Retail Price: $15,400 • Heated display merchandiser with curved glass sneeze guard canopy • 120/208-240V, 1 Phase, 5140 Watts - electric operation • Stainless steel food wells accommodate multiple steam table pans • Mounted on heavy-duty swivel casters for mobility • Built-in heat lamps and lighting under canopy CONDITION: Rated 3/10. This unit shows heavy wear throughout. The black exterior base panels have significant paint chipping, scratching, and scuffing on all sides. The curved glass canopy is cloudy and dirty with visible grime buildup. The stainless steel surfaces show heavy oxidation and staining. The diamond plate end panel on one side is dented and worn. Some food pans are included but are in rough shape. The data plate confirms model ED2-72 (partially obscured), serial number 5682-88-194. The rear view shows the stainless steel frame and lower shelf with visible wear and corrosion. Operational status is unknown - sold as-is. This unit will need thorough cleaning and likely service before returning to use.

Commercial floor-standing meat band saw with a large stainless steel cutting surface and sliding feed table. This unit shows significant use with surface rust on the lower wheel, staining and residue on the table surfaces, and rust around the blade guide area. The brand nameplate appears to have been removed, though the UL listing sticker (538A) and serial number 51165 are visible. FEATURES: Retail Price: $6,050 • Floor-standing commercial meat band saw with heavy-duty cast iron frame • Large stainless steel cutting table with adjustable sliding feed table and fence • Belt-driven motor with upper and lower blade wheels • UL Listed 538A for commercial food-preparing machines • Start/stop push button controls with safety warning labels CONDITION: Rated 6/10. This unit shows heavy commercial use throughout. The stainless steel table surfaces have staining, residue buildup, and scuffing. The lower blade wheel has notable surface rust. Rust is visible around the blade guide area and on the motor junction box. The motor electrical junction box cover is open with exposed wiring visible. The upper wheel appears cleaner than the lower wheel. The blade is installed. The cast iron base and frame show general wear and paint chipping. The brand identification plate appears to be missing or obscured. Overall a functional-looking unit that would benefit from thorough cleaning and inspection of the electrical connections before use.

Vulcan 1GR45M-1 natural gas floor fryer with 120,000 BTU input. This unit shows heavy use with significant grease buildup, rust, and cosmetic wear throughout the exterior and interior. The data plate confirms model 1GR45M-1, serial DV1140087, natural gas operation at 4.0 in. W.C. manifold pressure. FEATURES: Retail Price: $1,320 • Natural gas operation - 120,000 BTU/hr input • 45-50 lb. oil capacity single fry pot • Tube-style gas burners visible in fry pot • Stainless steel front panel with Vulcan branding • Mounted on casters for repositioning CONDITION: Heavy wear consistent with extended commercial use. The front stainless panel is in fair shape with scratches and minor dents. The rear and sides show extensive grease staining, rust, and discoloration. Interior fry pot has significant carbon and grease buildup. The front door panel has been removed and is resting separately. Gas burner tubes are visible and appear intact but heavily soiled. The drain valve area shows grease residue and corrosion. Casters are present but dirty. The caution label on the rear is partially obscured. Overall this unit will need thorough cleaning and a professional inspection before being placed back into service. Rated 5/10.

VEVOR YF-300A commercial bone sawing machine in used working condition. The unit shows moderate wear consistent with commercial kitchen use, including surface scratches and scuffing on the stainless steel work table and housing. The blade, blade guides, and adjustable fence are all present and intact. Power cord is in good condition. FEATURES: Retail Price: $990 • 2200W motor for heavy-duty bone and meat cutting • 110V/60Hz operation - standard US electrical outlet • 300mm (approx. 12") cutting capacity • Full stainless steel construction for easy cleaning and sanitation • Sliding work table with adjustable fence guide for precise cuts CONDITION: Rated 7/10. Stainless steel exterior shows moderate scratching and surface wear from use. Work table has scuff marks and light surface discoloration. The rotary power switch on the front is intact. Blade is installed and teeth appear in serviceable condition. Adjustable fence and blade guard are present. The unit sits on four feet and appears stable. Overall a solid working unit with cosmetic wear typical of a commercial environment. S/N: 230703 3259 03 0009.

Gesame MH-100AT automatic hamburger patty forming machine manufactured in 2024. This European-made unit features a stainless steel hopper with lid, automatic portioning mechanism, and integrated blue belt conveyor for patty output. The machine shows light use with minor surface marks on the stainless steel base but is overall in very good condition. FEATURES: Retail Price: $9,350 • Automatic hamburger patty forming with adjustable portioning • Large stainless steel hopper with lid for bulk meat loading • Built-in blue belt conveyor for hands-free patty output • 110V, 2-phase, 50/60 Hz, 0.50 HP (0.37 kW) - 2.14 AMP • Made in Europe by Gesame Food Machinery, S.L. (Barcelona) - Year 2024 CONDITION: Rated 8/10. This is a 2024 model showing light use. The stainless steel base and hopper exhibit minor surface scratches and light marks consistent with brief commercial use. The white HDPE forming plate and blue conveyor belt appear clean and in good working order. All controls including the on/off switch and speed dial on the front panel are intact. Power cord is present. The motor and gear assembly on the rear appear complete and undamaged. Overall a very well-maintained unit with minimal wear for its age.

Motak 24" countertop gas charbroiler with two burners. This unit shows significant use - the cast iron grates are heavily seasoned with visible rust and carbon buildup, and the stainless steel splash guards show grease staining and discoloration. The gas hose and regulator are included. Both red control knobs are intact and in place. FEATURES: Retail Price: $880 • Natural gas countertop charbroiler with 2-burner configuration • Individual red control knobs for independent burner operation • Heavy-duty cast iron cooking grates with three-sided splash guard • Stainless steel exterior body construction • Adjustable stainless steel legs for leveling - gas hose and regulator included CONDITION: Rated 5/10. The cast iron grill grates show heavy seasoning, rust, and carbon buildup consistent with extended commercial use. The stainless steel body has grease residue and some staining but is structurally sound. Both control knobs are present and functional. Splash guards show grease accumulation and minor discoloration. The unit includes its gas hose and regulator. Grates would benefit from thorough cleaning or replacement. Overall the unit is in fair, well-used condition.

Hobart 1712 commercial automatic meat slicer with a 12-inch blade. This unit shows significant cosmetic wear consistent with heavy commercial use, including surface oxidation, grime buildup, and general aging across the body and carriage assembly. The Hobart branding and numbered thickness dial are clearly visible on the front of the unit. FEATURES: Retail Price: $4,950 • 12-inch stainless steel slicing blade • Automatic carriage for hands-free slicing operation • Adjustable slice thickness dial with numbered settings (0-35) • Heavy-duty cast aluminum body construction • Built-in product fence and deflector CONDITION: Rated 6/10. The slicer shows heavy cosmetic wear from commercial use. There is noticeable surface grime, oxidation, and discoloration across the body, blade guard, and product tray. The carriage and fence mechanism appear intact but dirty. The thickness adjustment knob and dial are present and legible. Power cord is attached. A service sticker from a grinding/sharpening company is visible on the base. The unit will need a thorough cleaning and should be inspected for full operational function before use. No visible cracks or structural damage to the casting.

Hatco Toast-Rite conveyor toaster in used condition. The unit shows its age with visible wear, grease buildup, and discoloration on the stainless steel exterior. The wire conveyor basket is intact and the dual control knobs for speed and temperature are present. The unit is equipped with a heavy-duty plug for 208V single-phase operation. FEATURES: Retail Price: $3,080 • Hatco Toast-Rite commercial conveyor toaster • Stainless steel body construction • Dual adjustable control knobs for speed and heat • Wire conveyor basket for bread/bun toasting • 208V, 1-phase electrical - UL Listed CONDITION: Unit rates a 5/10. The stainless steel exterior shows moderate scratching, scuffing, and surface staining throughout. The front control panel label is worn and partially illegible. The wire conveyor basket shows discoloration and grease residue from use. The power cord and plug appear intact. The rear panel has some staining and minor grease buildup. Overall the unit shows heavy commercial use and would benefit from a thorough cleaning. The nameplate on the bottom is worn but the Hatco branding and "Wisconsin" origin label are still partially visible.

Cecilware double commercial panini grill press with dual hinged lids and ribbed cast iron cooking surfaces. This unit shows heavy use with significant grease buildup, rust on the exterior housing, and general wear consistent with extended commercial kitchen service. FEATURES: Retail Price: $3,080 • Double panini press with two independent hinged lids • Ribbed cast iron grill plates on both upper and lower surfaces for classic grill marks • Dual independent temperature control knobs for each side • Heavy-duty stainless steel body construction • Commercial 240V plug - ready for commercial kitchen installation CONDITION: Rated 5/10. This unit shows significant signs of heavy commercial use. There is substantial grease and carbon buildup on the grill plates and interior surfaces. The exterior stainless steel housing displays considerable rust and discoloration, particularly on the front panel and drip tray area. The temperature control knobs are present and intact. The power cord and plug appear functional. The hinged lids operate but show wear on the hinges and corrugated hoses. The drip tray beneath the unit is heavily rusted. This unit would benefit from a thorough deep cleaning and inspection before use. Sold as-is.

Silver King SKMAJ1 commercial milk dispenser / beverage cooler in used condition. The stainless steel exterior shows significant wear including surface scratches, scuffs, and residue/staining on the top panel. The interior cavity contains a white plastic milk dispensing carton holder, and a temperature gauge is visible on the rear panel. FEATURES: Retail Price: $3,080 • Single valve refrigerated milk/beverage dispenser • Stainless steel exterior construction • 115V / 60Hz electrical - standard plug-in operation • 315 BTU/HR cooling capacity with R-134A refrigerant • NSF and UL certified for commercial foodservice use CONDITION: Unit is rated 5/10. The stainless steel exterior shows heavy surface wear with scratches, scuffs, and staining throughout. The top panel has noticeable residue buildup and some light surface corrosion. The legs and base show wear and grime. The interior dispensing components appear intact. The power cord and plug are present. A red warning/danger label is visible on the lower rear. Functionality is not verified - sold as-is.

Hobart A-200T 20-quart commercial planetary mixer with built-in timer. This unit shows significant cosmetic wear consistent with years of heavy commercial use - paint chipping and rust spots are visible on the base, legs, and head, and the mixing bowl is not included. A wire whip attachment is present, hanging from the mixer head. FEATURES: Retail Price: $8,250 • 20-quart capacity planetary mixing action • 1/3 HP motor - 115V, single phase, 8.2 amps • 3-speed gear-driven transmission (stir, mix, whip) • Built-in 15-minute timer dial • #12 attachment hub for meat grinder, slicer/shredder, and other accessories • NSF certified - Made in USA (Serial: 31-1161-569) CONDITION: Rated 5/10. Heavy cosmetic wear throughout - paint is chipped and flaking on the base legs and body with visible rust and corrosion in multiple areas. The bowl is missing. One wire whip attachment is included. The speed selector lever and timer knob appear intact. Power cord is present. The mixer head and attachment hub show grime buildup. Overall this unit has seen extensive commercial use and would benefit from thorough cleaning and inspection. Functionality is not verified.

Commercial 20-tap stainless steel draft beer tower removed from service. This is a large-format, dual-post glycol-cooled tower designed for high-volume bar operations, featuring 20 individual faucet positions with blue-handled shut-off valves. Tap handles and faucet spouts have been removed; copper glycol lines are visible extending from both tower posts. FEATURES: Retail Price: $4,950 • 20 individual tap positions with stainless steel faucet bodies • Blue-handled shut-off valves at each tap station • Dual stainless steel tower risers for glycol cooling circulation • Approximately 60 inches wide - ideal for large bar installations • Heavy-duty stainless steel base plate for bar-top mounting CONDITION: Rated 6/10. The stainless steel base plate shows noticeable surface wear, scuffing, and some oxidation/water staining across the top surface. Tower posts show cosmetic wear and the rubber grommets at the top of each post appear aged. All 20 tap valve assemblies appear intact with blue handles present. Faucet handles and spouts are not included. Copper glycol lines are exposed and extend from both tower posts. Overall this is a functional unit that would benefit from a thorough cleaning and polishing. Some cosmetic imperfections are consistent with prior commercial use.

Lot of 4 black plastic patio armchairs in stackable design, well-suited for outdoor restaurant or cafe seating. The chairs show moderate wear consistent with prior commercial use, including surface scuffing and scratches on the seats and frames. All four chairs appear structurally intact with no cracks or missing components visible. FEATURES: Retail Price: $440 • Lot includes 4 black plastic armchairs • Stackable design for compact storage • Curved open armrests for comfortable seating • Molded contoured seat with reinforced underside • Durable all-weather plastic construction for outdoor use CONDITION: Rated 7/10. The chairs show visible surface wear including scratches, scuff marks, and minor discoloration on the seat surfaces and legs - consistent with regular commercial patio use. The front chair displays noticeable scratching and a small mark on the seat. All chairs appear structurally sound with no visible cracks, breaks, or missing parts. Auction lot tag #23 is affixed to the backrest of one chair.

Lot of 4 black plastic patio armchairs in stackable design, well-suited for outdoor restaurant or cafe seating. The chairs show moderate wear consistent with prior commercial use, including surface scuffing and scratches on the seats and frames. All four chairs appear structurally intact with no cracks or missing components visible. FEATURES: Retail Price: $440 • Lot includes 4 black plastic armchairs • Stackable design for compact storage • Curved open armrests for comfortable seating • Molded contoured seat with reinforced underside • Durable all-weather plastic construction for outdoor use CONDITION: Rated 7/10. The chairs show visible surface wear including scratches, scuff marks, and minor discoloration on the seat surfaces and legs - consistent with regular commercial patio use. The front chair displays noticeable scratching and a small mark on the seat. All chairs appear structurally sound with no visible cracks, breaks, or missing parts. Auction lot tag #23 is affixed to the backrest of one chair.

Lot of 4 black plastic patio armchairs in stackable design, well-suited for outdoor restaurant or cafe seating. The chairs show moderate wear consistent with prior commercial use, including surface scuffing and scratches on the seats and frames. All four chairs appear structurally intact with no cracks or missing components visible. FEATURES: Retail Price: $440 • Lot includes 4 black plastic armchairs • Stackable design for compact storage • Curved open armrests for comfortable seating • Molded contoured seat with reinforced underside • Durable all-weather plastic construction for outdoor use CONDITION: Rated 7/10. The chairs show visible surface wear including scratches, scuff marks, and minor discoloration on the seat surfaces and legs - consistent with regular commercial patio use. The front chair displays noticeable scratching and a small mark on the seat. All chairs appear structurally sound with no visible cracks, breaks, or missing parts. Auction lot tag #23 is affixed to the backrest of one chair.

Lot of 4 black plastic patio armchairs in stackable design, well-suited for outdoor restaurant or cafe seating. The chairs show moderate wear consistent with prior commercial use, including surface scuffing and scratches on the seats and frames. All four chairs appear structurally intact with no cracks or missing components visible. FEATURES: Retail Price: $440 • Lot includes 4 black plastic armchairs • Stackable design for compact storage • Curved open armrests for comfortable seating • Molded contoured seat with reinforced underside • Durable all-weather plastic construction for outdoor use CONDITION: Rated 7/10. The chairs show visible surface wear including scratches, scuff marks, and minor discoloration on the seat surfaces and legs - consistent with regular commercial patio use. The front chair displays noticeable scratching and a small mark on the seat. All chairs appear structurally sound with no visible cracks, breaks, or missing parts. Auction lot tag #23 is affixed to the backrest of one chair.

Lot of 4 black plastic patio armchairs in stackable design, well-suited for outdoor restaurant or cafe seating. The chairs show moderate wear consistent with prior commercial use, including surface scuffing and scratches on the seats and frames. All four chairs appear structurally intact with no cracks or missing components visible. FEATURES: Retail Price: $440 • Lot includes 4 black plastic armchairs • Stackable design for compact storage • Curved open armrests for comfortable seating • Molded contoured seat with reinforced underside • Durable all-weather plastic construction for outdoor use CONDITION: Rated 7/10. The chairs show visible surface wear including scratches, scuff marks, and minor discoloration on the seat surfaces and legs - consistent with regular commercial patio use. The front chair displays noticeable scratching and a small mark on the seat. All chairs appear structurally sound with no visible cracks, breaks, or missing parts. Auction lot tag #23 is affixed to the backrest of one chair.

Lot of 6 steel mesh patio dining chairs with armrests, suitable for restaurant outdoor seating. The chairs feature a decorative leaf motif on the backrest and expanded metal mesh seats. Visible wear consistent with outdoor commercial use including surface oxidation, paint fading, and general aging across the set. FEATURES: Retail Price: $990 • Lot of 6 heavy-duty steel patio arm chairs • Expanded metal mesh seat and backrest for drainage and airflow • Decorative leaf and scroll design on backrest • Curved armrests for guest comfort • Stackable design for convenient storage CONDITION: Rated 5/10. Chairs show moderate wear from outdoor commercial use. Paint finish appears faded and worn in several areas, with visible surface oxidation and discoloration on the metal frames. The front chair in the photo shows noticeable paint loss and a weathered appearance on the seat mesh and arms. Structurally the chairs appear intact with no obvious bent or broken components. All 6 chairs are included in this lot.

Lot of 4 black wrought iron mesh patio dining chairs with armrests - a classic commercial outdoor seating option. Two chairs are visible in the photos showing sturdy steel frames with expanded metal mesh seats and backrests, plus decorative leaf and scroll accents along the top of the backrest. All four chairs feature curved armrests and rubber foot caps. FEATURES: Retail Price: $660 • Lot of 4 matching wrought iron patio arm chairs • Expanded metal mesh seat and backrest for drainage and airflow • Decorative leaf and scroll detail on arched chair backs • Heavy-duty black powder-coated steel frame construction • Rubber/plastic foot caps to protect surfaces CONDITION: Rated 6/10. The chairs show signs of moderate use consistent with commercial patio service. The black powder coating appears intact in most areas, though some minor wear and surface scuffing is visible. The mesh seats and backrests are structurally sound with no holes or tears. Frames appear straight and stable with no visible bending or broken welds. Some minor dirt and dust accumulation is present. Foot caps appear to be in place on the visible chairs.

Lot of 4 black wrought iron patio dining arm chairs with expanded metal mesh seats and backrests. The stacked chairs are visible in the photo showing sturdy steel frames, curved armrests, and decorative leaf and scroll accents along the top of each arched backrest. The chairs show moderate use consistent with commercial outdoor patio service. FEATURES: Retail Price: $660 • Lot of 4 matching wrought iron patio arm chairs • Expanded metal mesh seat and backrest for drainage and airflow • Decorative leaf and scroll detail on arched chair backs • Heavy-duty black powder-coated steel frame construction • Rubber/plastic foot caps to protect surfaces CONDITION: Rated 6/10. The chairs show signs of moderate use consistent with commercial patio service. The black powder coating appears mostly intact, though some minor wear, surface scuffing, and fading is visible on the arms and edges. The mesh seats and backrests are structurally sound with no holes or tears. Frames appear straight and stable with no visible bending or broken welds. Some dirt and dust accumulation is present. Foot caps appear to be in place on the visible chairs.

Lot of 3 commercial restaurant dining chairs featuring black metal frames with an arched fan back design and burgundy padded vinyl seats. The chairs show moderate use consistent with a working restaurant environment - one chair is noted to be missing a screw. FEATURES: Retail Price: $330 • Lot of 3 commercial-grade dining chairs • Black powder-coated tubular steel frames with fan/peacock back design • Burgundy/maroon vinyl padded seat cushions • Cross-brace leg supports for added stability • Stackable design for easy storage CONDITION: Rated 6/10. Chairs show moderate wear from regular commercial use. The black metal frames exhibit minor scuffing and paint wear, particularly on the legs and contact points. Burgundy vinyl seats show surface wear and light scuffing but remain intact with no tears or rips visible. One chair is missing a screw, which may require a minor repair. Overall the chairs are structurally sound and functional with cosmetic wear typical of used restaurant furniture.

Lot of 4 matching commercial restaurant dining chairs featuring a classic fan-back (peacock) arched design with black powder-coated metal tube frames and burgundy vinyl padded seats. Chairs show moderate use consistent with restaurant service - vinyl seats display some wear and minor scuffing, and the metal frames show light scratches in places. FEATURES: Retail Price: $440 • Lot of 4 matching commercial dining chairs • Black powder-coated tubular metal frame with fan-back arch design • Burgundy/wine red padded vinyl upholstered seat cushions • Sturdy four-leg base with floor glides • Classic restaurant-style aesthetic suitable for dining rooms CONDITION: Rated 6/10. Chairs are in fair used condition showing signs of regular restaurant use. Vinyl seat cushions exhibit wear, light scuffing, and some minor cracking visible on a couple of seats. Black metal frames show minor scratches and surface wear but remain structurally solid with no visible bending or damage. All four chairs are complete and functional. Floor glides are present.

Lot of 4 matching commercial restaurant dining chairs featuring a classic fan-back (peacock) arched design with black powder-coated metal tube frames and burgundy vinyl padded seats. Chairs show moderate use consistent with restaurant service - vinyl seats display some wear and minor scuffing, and the metal frames show light scratches in places. FEATURES: Retail Price: $440 • Lot of 4 matching commercial dining chairs • Black powder-coated tubular metal frame with fan-back arch design • Burgundy/wine red padded vinyl upholstered seat cushions • Sturdy four-leg base with floor glides • Classic restaurant-style aesthetic suitable for dining rooms CONDITION: Rated 6/10. Chairs are in fair used condition showing signs of regular restaurant use. Vinyl seat cushions exhibit wear, light scuffing, and some minor cracking visible on a couple of seats. Black metal frames show minor scratches and surface wear but remain structurally solid with no visible bending or damage. All four chairs are complete and functional. Floor glides are present.

Lot of 2 bar height chairs featuring cognac/tan leather upholstery on both the seat and backrest with a sturdy dark metal tubular steel frame. The rear of each chair showcases a distinctive leather lace-up corset-style detail. Both chairs show moderate wear consistent with commercial use. FEATURES: Retail Price: $660 • Lot of 2 bar height chairs • Cognac/tan leather upholstered seat and backrest • Dark metal tubular steel frame with built-in footrest bar • Decorative leather lace-up detail on chair backs • Counter/bar height design - approximately 42 inches tall CONDITION: Both chairs show moderate wear. The left chair's seat cushion appears more faded and has visible scuffing and discoloration compared to the right chair. The metal frames show patina, oxidation, and some surface wear throughout. One chair leg appears to have a white wrap or repair near the base. The leather lace-up back details are intact on both chairs but show some wear and creasing. The leather on the backrests shows minor scuffing and edge wear. Overall structurally sound but cosmetically worn from use.

Lot of 2 bar height chairs featuring cognac/tan leather upholstery on both the seat and backrest with a sturdy dark metal tubular steel frame. The rear of each chair showcases a distinctive leather lace-up corset-style detail. Both chairs show moderate wear consistent with commercial use. FEATURES: Retail Price: $660 • Lot of 2 bar height chairs • Cognac/tan leather upholstered seat and backrest • Dark metal tubular steel frame with built-in footrest bar • Decorative leather lace-up detail on chair backs • Counter/bar height design - approximately 42 inches tall CONDITION: Both chairs show moderate wear. The left chair's seat cushion appears more faded and has visible scuffing and discoloration compared to the right chair. The metal frames show patina, oxidation, and some surface wear throughout. One chair leg appears to have a white wrap or repair near the base. The leather lace-up back details are intact on both chairs but show some wear and creasing. The leather on the backrests shows minor scuffing and edge wear. Overall structurally sound but cosmetically worn from use.

Lot of 2 bar height chairs featuring cognac/tan leather upholstery on both the seat and backrest with a sturdy dark metal tubular steel frame. The rear of each chair showcases a distinctive leather lace-up corset-style detail. Both chairs show moderate wear consistent with commercial use. FEATURES: Retail Price: $660 • Lot of 2 bar height chairs • Cognac/tan leather upholstered seat and backrest • Dark metal tubular steel frame with built-in footrest bar • Decorative leather lace-up detail on chair backs • Counter/bar height design - approximately 42 inches tall CONDITION: Both chairs show moderate wear. The left chair's seat cushion appears more faded and has visible scuffing and discoloration compared to the right chair. The metal frames show patina, oxidation, and some surface wear throughout. One chair leg appears to have a white wrap or repair near the base. The leather lace-up back details are intact on both chairs but show some wear and creasing. The leather on the backrests shows minor scuffing and edge wear. Overall structurally sound but cosmetically worn from use.

Lot of 2 bar height chairs featuring cognac/tan leather upholstery on both the seat and backrest with a sturdy dark metal tubular steel frame. The rear of each chair showcases a distinctive leather lace-up corset-style detail. Both chairs show moderate wear consistent with commercial use. FEATURES: Retail Price: $660 • Lot of 2 bar height chairs • Cognac/tan leather upholstered seat and backrest • Dark metal tubular steel frame with built-in footrest bar • Decorative leather lace-up detail on chair backs • Counter/bar height design - approximately 42 inches tall CONDITION: Both chairs show moderate wear. The left chair's seat cushion appears more faded and has visible scuffing and discoloration compared to the right chair. The metal frames show patina, oxidation, and some surface wear throughout. One chair leg appears to have a white wrap or repair near the base. The leather lace-up back details are intact on both chairs but show some wear and creasing. The leather on the backrests shows minor scuffing and edge wear. Overall structurally sound but cosmetically worn from use.

Lot of 2 bar height chairs featuring cognac/tan leather upholstery on both the seat and backrest with a sturdy dark metal tubular steel frame. The rear of each chair showcases a distinctive leather lace-up corset-style detail. Both chairs show moderate wear consistent with commercial use. FEATURES: Retail Price: $660 • Lot of 2 bar height chairs • Cognac/tan leather upholstered seat and backrest • Dark metal tubular steel frame with built-in footrest bar • Decorative leather lace-up detail on chair backs • Counter/bar height design - approximately 42 inches tall CONDITION: Both chairs show moderate wear. The left chair's seat cushion appears more faded and has visible scuffing and discoloration compared to the right chair. The metal frames show patina, oxidation, and some surface wear throughout. One chair leg appears to have a white wrap or repair near the base. The leather lace-up back details are intact on both chairs but show some wear and creasing. The leather on the backrests shows minor scuffing and edge wear. Overall structurally sound but cosmetically worn from use.

Lot of 2 bar height chairs featuring cognac/tan leather upholstery on both the seat and backrest with a sturdy dark metal tubular steel frame. The rear of each chair showcases a distinctive leather lace-up corset-style detail. Both chairs show moderate wear consistent with commercial use. FEATURES: Retail Price: $660 • Lot of 2 bar height chairs • Cognac/tan leather upholstered seat and backrest • Dark metal tubular steel frame with built-in footrest bar • Decorative leather lace-up detail on chair backs • Counter/bar height design - approximately 42 inches tall CONDITION: Both chairs show moderate wear. The left chair's seat cushion appears more faded and has visible scuffing and discoloration compared to the right chair. The metal frames show patina, oxidation, and some surface wear throughout. One chair leg appears to have a white wrap or repair near the base. The leather lace-up back details are intact on both chairs but show some wear and creasing. The leather on the backrests shows minor scuffing and edge wear. Overall structurally sound but cosmetically worn from use.

Lot of 2 bar height chairs featuring cognac/tan leather upholstery on both the seat and backrest with a sturdy dark metal tubular steel frame. The rear of each chair showcases a distinctive leather lace-up corset-style detail. Both chairs show moderate wear consistent with commercial use. FEATURES: Retail Price: $660 • Lot of 2 bar height chairs • Cognac/tan leather upholstered seat and backrest • Dark metal tubular steel frame with built-in footrest bar • Decorative leather lace-up detail on chair backs • Counter/bar height design - approximately 42 inches tall CONDITION: Both chairs show moderate wear. The left chair's seat cushion appears more faded and has visible scuffing and discoloration compared to the right chair. The metal frames show patina, oxidation, and some surface wear throughout. One chair leg appears to have a white wrap or repair near the base. The leather lace-up back details are intact on both chairs but show some wear and creasing. The leather on the backrests shows minor scuffing and edge wear. Overall structurally sound but cosmetically worn from use.

Lot of 2 bar height chairs featuring cognac/tan leather upholstery on both the seat and backrest with a sturdy dark metal tubular steel frame. The rear of each chair showcases a distinctive leather lace-up corset-style detail. Both chairs show moderate wear consistent with commercial use. FEATURES: Retail Price: $660 • Lot of 2 bar height chairs • Cognac/tan leather upholstered seat and backrest • Dark metal tubular steel frame with built-in footrest bar • Decorative leather lace-up detail on chair backs • Counter/bar height design - approximately 42 inches tall CONDITION: Both chairs show moderate wear. The left chair's seat cushion appears more faded and has visible scuffing and discoloration compared to the right chair. The metal frames show patina, oxidation, and some surface wear throughout. One chair leg appears to have a white wrap or repair near the base. The leather lace-up back details are intact on both chairs but show some wear and creasing. The leather on the backrests shows minor scuffing and edge wear. Overall structurally sound but cosmetically worn from use.

Lot of 2 bar height chairs featuring cognac/tan leather upholstery on both the seat and backrest with a sturdy dark metal tubular steel frame. The rear of each chair showcases a distinctive leather lace-up corset-style detail. Both chairs show moderate wear consistent with commercial use. FEATURES: Retail Price: $660 • Lot of 2 bar height chairs • Cognac/tan leather upholstered seat and backrest • Dark metal tubular steel frame with built-in footrest bar • Decorative leather lace-up detail on chair backs • Counter/bar height design - approximately 42 inches tall CONDITION: Both chairs show moderate wear. The left chair's seat cushion appears more faded and has visible scuffing and discoloration compared to the right chair. The metal frames show patina, oxidation, and some surface wear throughout. One chair leg appears to have a white wrap or repair near the base. The leather lace-up back details are intact on both chairs but show some wear and creasing. The leather on the backrests shows minor scuffing and edge wear. Overall structurally sound but cosmetically worn from use.

Lot of 2 bar height chairs featuring cognac/tan leather upholstery on both the seat and backrest with a sturdy dark metal tubular steel frame. The rear of each chair showcases a distinctive leather lace-up corset-style detail. Both chairs show moderate wear consistent with commercial use. FEATURES: Retail Price: $660 • Lot of 2 bar height chairs • Cognac/tan leather upholstered seat and backrest • Dark metal tubular steel frame with built-in footrest bar • Decorative leather lace-up detail on chair backs • Counter/bar height design - approximately 42 inches tall CONDITION: Both chairs show moderate wear. The left chair's seat cushion appears more faded and has visible scuffing and discoloration compared to the right chair. The metal frames show patina, oxidation, and some surface wear throughout. One chair leg appears to have a white wrap or repair near the base. The leather lace-up back details are intact on both chairs but show some wear and creasing. The leather on the backrests shows minor scuffing and edge wear. Overall structurally sound but cosmetically worn from use.

Lot of 2 bar height chairs featuring cognac/tan leather upholstery on both the seat and backrest with a sturdy dark metal tubular steel frame. The rear of each chair showcases a distinctive leather lace-up corset-style detail. Both chairs show moderate wear consistent with commercial use. FEATURES: Retail Price: $660 • Lot of 2 bar height chairs • Cognac/tan leather upholstered seat and backrest • Dark metal tubular steel frame with built-in footrest bar • Decorative leather lace-up detail on chair backs • Counter/bar height design - approximately 42 inches tall CONDITION: Both chairs show moderate wear. The left chair's seat cushion appears more faded and has visible scuffing and discoloration compared to the right chair. The metal frames show patina, oxidation, and some surface wear throughout. One chair leg appears to have a white wrap or repair near the base. The leather lace-up back details are intact on both chairs but show some wear and creasing. The leather on the backrests shows minor scuffing and edge wear. Overall structurally sound but cosmetically worn from use.

Industrial-style bar height chair featuring a brown leather padded seat and sling-style leather backrest on a dark steel tube frame. This chair shows significant wear consistent with regular commercial use, including visible scratching and scuffing on the leather surfaces and patina on the metal frame. FEATURES: Retail Price: $385 • Brown leather upholstered seat cushion • Sling-style leather backrest with decorative lace-up detail on rear • Industrial dark steel tube frame construction • Integrated foot rest rail for comfort • Sturdy four-leg base with cross bracing for stability CONDITION: Rated 5/10. The leather seat shows moderate surface scratching, scuff marks, and some discoloration from use. The leather backrest exhibits noticeable wear, creasing, and scratching on both front and back surfaces - the darker brown leather on the backrest shows more pronounced aging and patina. The lace-up detail on the rear of the backrest is intact but the leather lacing shows wear. The steel frame has light surface oxidation and wear marks but remains structurally sound. Overall, this chair is functional but shows clear signs of extended commercial service.

Lot of 3 industrial-style dining chairs featuring cognac/tan leather seats and backrests on dark steel tubular frames. The chairs have a distinctive leather lace-up detail on the back of the backrest, giving them a rustic, handcrafted look well-suited for restaurant, bar, or cafe seating. FEATURES: Retail Price: $990 • Set of 3 matching dining chairs • Genuine leather upholstered seats and backrests in cognac/tan brown • Sturdy dark metal tubular steel frame with four legs • Decorative leather lace-up stitching detail on rear of backrest • Industrial/rustic restaurant-grade design CONDITION: Rated 5/10. The chairs show moderate wear consistent with commercial use. Leather on all three seats and backrests displays visible patina, scuffing, discoloration, and some cracking - particularly on the middle and right chairs. The leftmost chair appears to have a slightly cleaner seat cushion, possibly re-covered or less worn. The leather backrests show darkening, wear marks, and aging throughout. Steel frames appear structurally sound with no visible bending or broken welds. All three chairs are standing level and appear fully functional. Overall, the wear gives them an aged, distressed look that may complement certain restaurant aesthetics.

Lot of 4 steel-framed dining chairs with tan/cognac leather upholstered seats and backs. These chairs show noticeable wear consistent with regular restaurant use - leather exhibits discoloration, staining, and patina across all four seats and backrests, and the metal frames show scuffing and finish wear. FEATURES: Retail Price: $1,320 • Set of 4 matching dining chairs sold as one lot • Dark steel tube frame construction with floor glides • Tan/cognac leather padded seat cushions • Leather-wrapped backrests with decorative lace-up stitching detail on rear • Compact, stackable design suitable for restaurant or dining use CONDITION: Rated 5/10. All four chairs are intact and structurally sound. The leather upholstery on the seats shows moderate staining, discoloration, and wear - some seats are noticeably darker and more worn than others. The leather backrests display similar aging with visible patina and darkening, particularly on the lace-up detail areas on the rear of the chairs. Metal frames show general scuffing and finish loss on the legs. Some leg glides appear worn or missing. Overall, these chairs show honest use and would benefit from leather conditioning or reupholstering.

Lot of 4 steel-framed dining chairs with tan/cognac leather upholstered seats and backs. These chairs show noticeable wear consistent with regular restaurant use - leather exhibits discoloration, staining, and patina across all four seats and backrests, and the metal frames show scuffing and finish wear. FEATURES: Retail Price: $1,320 • Set of 4 matching dining chairs sold as one lot • Dark steel tube frame construction with floor glides • Tan/cognac leather padded seat cushions • Leather-wrapped backrests with decorative lace-up stitching detail on rear • Compact, stackable design suitable for restaurant or dining use CONDITION: Rated 5/10. All four chairs are intact and structurally sound. The leather upholstery on the seats shows moderate staining, discoloration, and wear - some seats are noticeably darker and more worn than others. The leather backrests display similar aging with visible patina and darkening, particularly on the lace-up detail areas on the rear of the chairs. Metal frames show general scuffing and finish loss on the legs. Some leg glides appear worn or missing. Overall, these chairs show honest use and would benefit from leather conditioning or reupholstering.

Lot of 2 mid-century style solid wood bar height chairs with curved backrests and contoured seats. The chairs show moderate wear consistent with commercial restaurant use, including finish wear on the seats, scuffing on the legs, and some discoloration on the wood surfaces. FEATURES: Retail Price: $550 • Lot of 2 solid wood bar height chairs • Mid-century modern curved backrest design • Contoured solid wood seat for comfort • Four-leg construction with cross-brace support rails for stability • Warm walnut-tone wood finish CONDITION: Rated 6/10. The chairs show moderate use. The seat surfaces exhibit noticeable finish wear and fading, particularly visible on the top of the seats. The legs show scuffing and wear at the floor contact points. The curved backrests are in better condition, retaining more of their original finish. The wood frames appear structurally sound with no visible cracks or broken joints. Cross-brace support rails are intact. Overall, these are functional chairs that show honest commercial wear. Bid X 2

Lot of four matching commercial dining chairs featuring contoured solid wood seats and curved bentwood backrests in a warm walnut/mahogany finish, mounted on sturdy black metal frames. The chairs show normal wear consistent with restaurant use, including minor surface scratches and scuffing on the wood seats. FEATURES: Retail Price: $880 • Lot of 4 matching restaurant dining chairs • Contoured solid wood seats in warm walnut/mahogany finish • Curved bentwood backrests for comfortable seating • Sturdy black powder-coated metal frames with cross-brace support • Commercial-grade construction suitable for restaurant or cafe use CONDITION: Rated 8/10. The wood seats show light surface scratches, scuffing, and minor wear marks from regular use - visible in the photos. The wood finish retains a good sheen overall with some areas of dulling on high-contact spots. The black metal frames appear structurally sound with no visible bends or breaks. All four chairs are complete and functional. No missing hardware or broken components observed.