T&M #13 Restaurant Equipment Auction

Blast Chiller/ Shock Freezer, reach-in, (3) compartment, (3) top mounted self contained refrigeration systems, (11) 12" x 20" x 2-1/2" or (5) 18"x 26"pan capacity, (2) reversible half doors, chills (133 lb.) 165°F to 37°F/2hr & freeze (95 lb.) 165°F to 0°F/4hr, (3) independent manual/fully automatic controls, each cavity contains (1) food probe & (1) air probe, top cavities have (1) wire shelf each, bottom cavity has (3) wire shelves, removable drain pan, 304 stainless steel interior & exterior, adjustable legs, R404a, 208v/60/1-ph, 20.0 amps, NEMA L6-20P, ETL, ETL-Sanitation. Weight 796lbs Cost $16,176.46

True Refrigeration T-49G-HC~FGD01 Description The True T-49G-HC~FGD01 two-section glass door refrigerator is built with low-emissivity glass doors, meaning they resist heat transfer to maintain energy-efficient operation. Polyurethane foam insulation fills the cabinet structure, adding strength and keeping cold air inside the cabinet. Its evaporator is protected with an epoxy coating that helps prevent rusting over time. This True T-49G-HC~FGD01 glass door refrigerator holds temperatures between 33 and 38 degrees Fahrenheit, and an external temperature display lets operators keep an eye on the internal temperature. A capillary tube refrigeration system recovers temperature quickly to ensure food is fresh and safe. Its bottom-mounted condensing unit is accessible for servicing and cleaning, simplifying maintenance on this glass door refrigerator. When the compressor turns on, its condensing fan motor blows air in an opposite direction for 20 seconds, blowing off debris and dust from the condensing coil. With consistent buildup removal, the coil can work more efficiently and for longer periods with less energy consumption. This technology works best with general preventative maintenance practices. Product Details Self-contained capillary tube refrigeration system circulates R290 hydrocarbon refrigerant to provide consistent cooling Temperature range: 33-38 degrees F Electronically commutated fan motors operate efficiently, reducing heat production and saving energy Fan motor blows in an opposite direction for 20 seconds to remove buildup Condensing unit is located in the bottom of the cabinet to provide convenient access for cleaning and maintenance Stainless steel exterior resists rusting and scratching Cabinet interior is lined with NSF-approved, clear-coated aluminum Stainless steel interior floor with coved corners Cabinet is insulated with foamed-in-place polyurethane Steel frame rail is welded and powder coated black for durability and corrosion resistance 4-in. stem castors enable refrigerator to be wheeled around for cleaning underneath and repositioning 6 gray, PVC-coated shelves are adjustable in 1⁄2-in. increments Cabinet interior is illuminated by bright LED lights Exterior display shows cabinet temperature Epoxy-coated evaporator resists corrosion Energy-Efficient Glass Doors Double-pane, low-emissivity glass prevents heat from being transferred into cabinet Extruded aluminum handles measuring 15 in. are fitted to doors Self-closing doors form a positive seal to the door frame Sealed with magnetic, 1-piece gaskets that can be removed for cleaning without tools Dimensions & Utilities Shelves: 249⁄16 in. W x 223⁄8 in. D Overall: 541⁄8 in. W x 32 in. D x 833⁄8 in. H 5.4 A, 1⁄2 HP 115 V/60 Hz/1 ph, 9-ft. cord with a NEMA 5-15P plug Product Features Product Features From The Manufacturer Refrigerator, reach-in, two-section, framed glass door version 01, (2) glass doors, Missing Shelves Includes (6) PVC coated adjustable wire shelves, LED interior lighting, stainless steel front, aluminum sides, clear coated aluminum interior with stainless steel floor, 4" castors, R290 Hydrocarbon refrigerant, 1/2 HP, 115v/60/1-ph, 5.4 amps, NEMA 5-15P, cULus, UL EPH Classified, Made in USA, ENERGY STAR® Some Dents noted**. Cost $6180.00

Standard Features: Black exterior Stainless steel top and interior Electronic temperature controller Maintains temperatures between 33°F – 40°F Heavy duty compressor with environmentally friendly R290 refrigerant Slide out compressor assembly for easy maintenance LED Interior light(s) Magnetic door gasket(s) standard for positive door seal Door lock(s) standard Pre-installed epoxy coated shelves Pre-installed casters. Scratches noted on SS top.  Cost $3,507.00

Electric Countertop Griddle, Power Source Electric, Cooking Surface Depth 19 1/2 in, Cooking Surface Width 23 3/4 in, Overall Height 15 1/2 in, Overall Width 24 in, Overall Depth 25 in, Material Aluminized Steel, Stainless Steel, Control Type Manual, Voltage 208V AC, Installation Type Countertop, Maximum Operating Temperature 450 Degrees F, Current 0.9 A, Flat Polished Steel Griddle Plate, Grease Collection Drawer, Shut-Off Valve $2,471.99

TOUCHFREE® ICE MAKER / WATER DISPENSERS • Sleek, European design with attractive rounded corners and informative instruction labels. • Up to 25% less fan noise allows installation of the unit in the quietest hallways. • Improved dispensing with easier access and room for most containers. • TouchFree actuation provides convenient one-hand operations and eliminates the risk of cross contamination. • Flexible utility location. • Makes and dispenses flaked ice Select ice only or ice and water at the touch of a switch, conveniently located on front panel. Touchfree® Ice Maker & Dispenser, Flake-Style, counter model, air-cooled, self-contained condenser, 453-lb production/24 hrs w/12 lb. storage, polyurethane interior, stainless steel exterior, EnerLogic™ Technology, 115/60/1 Cost $5,100.00

Standard Features • Horizontal finned chiller plates to hold 1/3, 1/6 or 1/9 size pans • General fit 7.56” chiller bar spacing • 20” hinged doors • Compressor compartment (Right-side) • Hinged night cover • Casters • Sloped rail BLU Technology Kairak BLU Refrigeration Prep Tables are designed to provide consistent, uniform cooling to each individual pan to prevent food spoilage. This new system provides inclined walls for trouble-free reach to food pans while keeping the divider bars close to the food pans for efficient heat transfer. Our NSF7 approved BLU Pan Chilling System ensures condiments for salads, pizzas, and sandwiches always stay fresh without the need for fans, blower coils or other refrigeration enhancing components. Top Heavy-duty stainless steel, 2-1/2 inch high raised rail, slightly sloped to front or flat with BLU patent pending pan chiller system. T6 anodized horizontal chiller plates to accommodate 1/3”, 1/6” and 1/9” pans. All heavy duty stainless steel construction with hinged night cover. Comes standard with white polyethylene cutting board. Body Base exterior front and sides are stainless steel. Back is galvanized steel and bottom is galvanized steel. Interior has coved corners. Two powder coated (gray), wire shelves are provided for each door section. Casters are provided. Doors are standard with foam insulated stainless steel, self-closing hinges and snap-in magnetic gaskets. Insulation Nominal two (2) inch thick foamed-in-place polyurethane. Refrigeration All necessary controls and components are included in Self-contained models. Refrigeration includes condensing unit, expansion tank, heat exchanger and pump closely located from and in communication with the refrigeration controls. » BLU Pan Chiller system exceeds NSF requirements by maintaining food at or below 39° using specified 6” deep pans. » No Frost – Through precise control of temperature, all types of food products can remain in BLU Pan Chiller day or night with no risk of freezing your high water content foods. » No Defrost – No need for chilling system to undergo a periodic shutdown for a defrost cycle, which can increase food temperatures. » No Fans – Requires no fans to enhance refrigeration on cold rail, eliminates worry that condensation and food spillage will damage the fan and associated components. » Proximity Cooling – Horizontal chiller plate walls are as close as possible to the food pans for efficient heat transfer. » Maximum Versatility – Can be designed to accommodate various pan configurations/sizes depending on menu requirements. » Storage Capacity – Our cabinet coils are recessed into storage compartment back walls to allow superior refrigeration flow for stored pans. Cost $2,599.00

Refrigerator Slide-top Introducing the Randell 4939DWR-290 Refrigerator Slide-top One-section, the perfect addition to any commercial kitchen or food service establishment looking for a high-quality, innovative, and efficient refrigeration solution. With a 17.4 cu. ft. capacity, this refrigerator slide-top has ample space to store all your chilled goodies. Crafted with a stainless steel top and sides, this refrigerator slide-top exudes a sleek and modern look while providing durability and longevity. The (2) slide-top doors make it easy to access your stored items, while the stainless steel interior ensures hygienic storage conditions. This refrigerator slide-top also features a self-contained refrigeration system that runs on R290 hydrocarbon refrigerant, making it eco-friendly and energy-efficient, so you can keep your operating costs low. The 1/4 HP compressor provides ample cooling power, ensuring that your food and beverages stay chilled at the optimal temperature. With 6" heavy-duty casters, this refrigerator slide-top is easy to move around, and the front 2 locking casters ensure stability when in use. Plus, with its NEMA 5-15P plug, this refrigerator slide-top is easy to install and use. And that's not all – the Randell 4939DWR-290 Refrigerator Slide-top One-section is cUL, UL, and NSF certified, so you can rest assured that it meets the highest safety and quality standards. Plus, it's made right here in the USA, ensuring that you're supporting local businesses while getting a high-quality product. In summary, the Randell 4939DWR-290 Refrigerator Slide-top One-section is the perfect refrigeration solution for any commercial kitchen or food service establishment. With its ample storage space, sleek design, eco-friendly features, and top-notch quality, you won't find a better refrigeration solution on the market. Buy yours today and take your refrigeration game to the next level! Randell, 4939DWR-290, Refrigerator, slide-top, one-section, 17.4 cu. ft. capacity, stainless steel top & sides, (2) slide-top doors, stainless steel interior, 6" heavy duty casters (front 2 locking), self-contained refrigeration system, R290 hydrocarbon refrigerant, 1/4 HP, 115v/60/1, 1.7 amps, NEMA 5-15P, cUL, UL, NSF, Made in USA Because this item is not stocked in our warehouse, processing, transit times and stock availability will vary. If you need your items by a certain date, please contact us prior to placing your order. Expedited shipping availability may vary. We cannot guarantee that this item can be cancelled off of the order or returned once it is placed. Cost $16,124.00

When used in conjunction with an i-1470c Indigo series QuietQube ice machine, this Manitowoc CVDF1400 remote ice machine condenser provides quieter operation than comparable remote condenser units! The secret is the unit's cool vapor defrost (CVD) technology, which is quieter and more efficient than the hot gas evaporator systems utilized by traditional remote condenser machines. Just connect your ice machine via a remote tubing line kit (sold separately), and this remote condenser will effectively dissipate heat at a convenient location, away from the ice machine. In addition to a quieter operation, this remote condenser will help lower the ambient temperature around your ice machine, which drastically improves efficiency while providing a more comfortable environment for your staff. - Operates between -20-130 degrees Fahrenheit Has damage noted in photos. Cost $2,553.00

The Manitowoc RC-21 remote ice machine condenser line kit is a necessary component to setting up your remote condenser system. When your condensing unit is set up remotely, you need a line kit to run refrigerant to and from the condenser and your ice machine. Cost $219.00

The Wolf SCB25 charbroiler is ideal for cooking burgers, chicken, and more. Liquids and food debris are collected in the removable grease drawer to help with the cleaning process. Most of the unit is made of stainless steel, which is strong and cleans quickly. Its 4-inch legs can adjust on uneven surfaces or lift the unit off countertops. The unit features heavy-duty cast iron char radiants and burners as well as reversible cast iron grates for self-cleaning and level broiling. The Wolf SCB25 charbroiler has individual controls for each burner so the operator can cook different types of food at once. Product Details Heated by natural gas Durable stainless steel sides, control panel, top trim, backsplash, and grease trough Cast iron char radiants and 4 burners can endure heavy use Grates can be reversed to broil or self-clean Cast-in pitched grease trough in each grate creates fat runoff and controls flame flare-ups Standing pilot ignition system aids in lighting the pilot User-friendly infinite heat control valve for each burner Deflector system pushes heat up towards the cooking area and cools the grease drawer and drip areas Grease drawer collects food debris and liquids until it is cleaned 4-in. adjustable legs keep the unit sturdy 3⁄4-in. rear gas connection and gas pressure regulator 58,000 BTU Broiling area dimensions: 211⁄2 in. W x 201⁄2 in. D Overall dimensions: 251⁄4 in. W x 271⁄4 in. D x 143⁄4 in. H From The Manufacturer Charbroiler, 25-1/4" W, natural gas, countertop, (4) 14,500 BTU burners with standing pilots and cast iron radiants, manual gas valve controls, stainless steel front, sides, top trim, backsplash & grease trough, cast iron top grates, 4" adjustable legs, 58,000 BTU, CSA, NSF Cost $6,318.00

stainless steel bottle cooler Introducing the Continental Refrigerator CBC24 Flat Top Bottle Cooler - the ultimate solution for keeping your drinks chilled and ready for serving. This high-quality bottle cooler is a must-have for any commercial or home bar, providing you with a reliable and efficient way to cool your bottles and cans. Crafted with a stainless steel top and a textured baked black enamel exterior, the CBC24 is not only stylish but also durable and easy to clean. It features a slide-back lid that can accommodate up to (4-1/2) cases of 12 oz bottles or (7-1/2) cases of 12 oz cans, making it perfect for a small to medium-sized bar. The galvanized interior of the CBC24 ensures excellent insulation, while the electronic controller with a digital display and hi-low alarm allows for precise temperature control. The removable cap catcher keeps your bar clean and tidy, and the self-contained refrigeration system ensures that your drinks are always at the perfect temperature. Equipped with a powerful 1/5 hp compressor, the CBC24 is energy-efficient and reliable, making it an ideal choice for busy bars and restaurants. It is also NSF and cETLus certified, ensuring that it meets the highest standards of quality and safety. Whether you are running a bar, restaurant, or hosting a party at home, the Continental Refrigerator CBC24 Flat Top Bottle Cooler is the perfect addition to your setup. With its sleek design, efficient cooling system, and spacious capacity, this stainless steel bottle cooler is sure to impress your customers and guests while keeping your drinks perfectly chilled. So, invest in the CBC24 today and take your bar experience to the next level. Continental Refrigerator, CBC24, Flat Top Bottle Cooler, 24"W, stainless steel top with (1) slide back lid, (4-1/2) cases/12 oz bottle or (7-1/2) cases/12 oz can capacity, textured baked black enamel exterior, galvanized interior, electronic controller with digital display & hi-low alarm, removable cap catcher, self-contained refrigeration, 1/5 hp, cETLus, NSF Cost $2,570.00

The heavy-duty Classics Decorative Waste Container has a perforated steel design for a clean and modern appearance. This container is a smart choice for high-traffic areas and can be used both outdoors and indoors. Cost $648.00

Steaming three pans of food at once, the Vulcan C24EO3AF convection steamer uses a 60-minute timer that buzzes when cooking is finished so food does not burn. Cooking is indicated with a light and the other lights shine when water levels are too high or too low; when they are low, this unit refills automatically if it has a water supply hook-up. To protect important components, the mechanical controls are water resistant and the heated elements are embedded so they do not touch water. The Vulcan C24EO3AF three-pan convection steamer is made of stainless steel, which is durable and quick to wipe clean. To enhance cleaning, the wire pan racks and side panels are removable and safe for dishwasher use. This unit does not require delimer treatment or a water filtration system. Because this steamer has a front-vented design, it can slide into tight spaces without the vent being blocked. Product Details Accommodates (3) 12-in. x 20-in. pans Indicator light shows the water level and if the unit is cooking Constant steam feature Generator pan with stamped water level line Refills automatically when the water is low Embedded heating elements do not contact water Water-resistant mechanical controls Front-venting design minimizes side clearance needs Side panels and wire pan racks are removable and dishwasher safe 60-min. timer with a buzzer indicates when cooking is complete Timer compensates for loading and unloading Durably built with stainless steel No water filtration or deliming is needed Heavy-duty door can be opened while cooking 2-panel door includes a pan guard Convection Steamer, Boilerless Countertop with Auto-Fill, electric, (3) 12" x 20" pan capacity, manual controls with 60 minute timer, buzzer, and constant steam feature, generator pan with stamped water level line, heavy duty door with pan guard, stainless steel interior and exterior, cULus, UL EPH Classified, ENERGY STAR® Cost $11,622.00

The BKI® WS-15ST mobile fried food warmer was devel- oped for quick-serve retailers and convenience stores. This warmer uses radiant heat to extend the freshness of a variety of fried foods, so you can keep nuggets, fingers, fries, and wedges crispy and delicious for longer. Each unit can hold a full-size 12” x 20” steam table pan with 10 pounds of holding capacity. This model also features a rotating top that allows you to swivel the top heat 90° for easier dumping and to minimize the chance of burn. Flat sur- faces and easily removable parts make cleaning a breeze. „ 10 lb holding capacity „ Removable parts and flat surfaces for easy cleaning „ Bin accepts a 12” x 20” steam table pan „ In-counter unit „ Heat guard hinges for cleaning and access to heating elements „ 1000 kW top heat „ Top swivels for easy dumping of product into bin Cost $2,268.00

The BKI® WS-15ST mobile fried food warmer was devel- oped for quick-serve retailers and convenience stores. This warmer uses radiant heat to extend the freshness of a variety of fried foods, so you can keep nuggets, fingers, fries, and wedges crispy and delicious for longer. Each unit can hold a full-size 12” x 20” steam table pan with 10 pounds of holding capacity. This model also features a rotating top that allows you to swivel the top heat 90° for easier dumping and to minimize the chance of burn. Flat sur- faces and easily removable parts make cleaning a breeze. „ 10 lb holding capacity „ Removable parts and flat surfaces for easy cleaning „ Bin accepts a 12” x 20” steam table pan „ In-counter unit „ Heat guard hinges for cleaning and access to heating elements „ 1000 kW top heat „ Top swivels for easy dumping of product into bin Cost $2,268.00

Commercial Trash Can with Tray top. Wadley Cost $1,486.00

Commercial Trash Can with Tray top. Wadley Cost $1,486.00

Commercial Trash Can with Tray top. Wadley Cost $1,486.00

Sturdy Commercial Mop Bucket & Wringer With Wheels Blue Color. Has several interchangeable accessories. Cost $349.00

Sturdy Commercial Mop Bucket & Wringer With Wheels Blue Color. Has several interchangeable accessories. Cost $349.00

This Follett 25CI425A-SI Symphony countertop air cooled ice maker and dispenser is the perfect solution to ice dispensing in your healthcare facility, retirement community, or restaurant! Its ice maker produces up to 425 lb. of soft, chewable Chewblet compressed nugget ice per day. This type of ice is often preferred over cubes for its ability to conform when used in ice packs! It is also chewable and perfect for filling cups and pitchers. This ice maker and dispenser is designed for optimum sanitation. The automatic self-flushing feature removes more impurities so that you are a left with cleaner, better flavored ice. Add in the drain cup that helps provide an air gap for added protection of the food zone components and you have an ice machine that keeps itself free of contaminants. Agion silver-based antimicrobial technology also provides protection of many important components that come into contact with ice and water. In addition, this ice machine features SensorSAFE infrared ice dispensing technology! Simply hold the cup under the dispenser and it will automatically dispense ice without any contact between your hands or cup, and the machine. This innovative design helps prevent cross contamination and infection by reducing contact. Looking for an environmentally responsible unit? Look no further. This Follett ice machine and dispenser uses R-404A refrigerant that has a zero ozone depletion potential and its continuous ice making process uses less electricity and water. Plus, this unit features Quiet Night sleep mode to automatically turn off the machine when it is idle. This unit uses 12 gallons of potable water per 100 lb. of ice and has a storage capacity of 25 lb. This Follett ice maker and dispenser features an easy, quick cleaning cycle and the LED control board provides instant access to the machine status and settings. The durable stainless steel panels are easy to remove in order to perform maintenance on the machine, and the other components like the poly drain pan, grille, and dispenser lid are corrosion-resistant so that you can count on them for a long time to come. Cost $8,395.00

Meet your go-to chair for commercial dining spaces. The Grand Rapids chair has everything: a sturdy steel frame and legs, a solid wood seat and back, and a contemporary style that goes with a myriad of styles and spaces. 30" seat height. 250lbs limit Cost $680.00

Meet your go-to chair for commercial dining spaces. The Grand Rapids chair has everything: a sturdy steel frame and legs, a solid wood seat and back, and a contemporary style that goes with a myriad of styles and spaces. 30" seat height. 250lbs limit Cost $680.00

Meet your go-to chair for commercial dining spaces. The Grand Rapids chair has everything: a sturdy steel frame and legs, a solid wood seat and back, and a contemporary style that goes with a myriad of styles and spaces. 30" seat height. 250lbs limit Cost $680.00

Meet your go-to chair for commercial dining spaces. The Grand Rapids chair has everything: a sturdy steel frame and legs, a solid wood seat and back, and a contemporary style that goes with a myriad of styles and spaces. 30" seat height. 250lbs limit Cost $680.00

Meet your go-to chair for commercial dining spaces. The Grand Rapids chair has everything: a sturdy steel frame and legs, a solid wood seat and back, and a contemporary style that goes with a myriad of styles and spaces. 30" seat height. 250lbs limit Cost $680.00

Meet your go-to chair for commercial dining spaces. The Grand Rapids chair has everything: a sturdy steel frame and legs, a solid wood seat and back, and a contemporary style that goes with a myriad of styles and spaces. 30" seat height. 250lbs limit Cost $680.00

The True TUC-27G-HC~FGD01 27 5/8" glass door undercounter refrigerator is ideal for tight spaces at your busy establishment. Food storage is necessary in food service operations, especially when space is at a premium! With this undercounter refrigerator, your facility can easily add convenient and compact cold food storage. With an interior that's quickly accessible and visible through a glass door, the unit is ideal for keeping condiments and other frequently used ingredients nearby at all times. Plus, the refrigerator operates with R290 hydrocarbon refrigerant. At just 27 5/8" wide, this unit is perfect for fitting into kitchens with limited space and a need for additional cold food storage. The short 36" height enables the refrigerator to easily slide beneath counters and prep tables, allowing you to maximize floor space to store produce, condiments, drinks, or other ingredients. Built to withstand heavy use in commercial applications, the unit features a stainless steel front, top, and ends. As a protective measure against leaks and spills, the interior floor is also stainless steel, while the rest of the interior is lined with clear coated aluminum. Plus, to ensure proper food safe temperatures and structural rigidity, full body insulation is foamed-in-place. Accessible through the front glass door, the interior houses 2 heavy-duty, PVC-coated wire shelves. These promote organization and efficient storage, and because they're adjustable, the shelves accommodate a wide variety of supplies and ingredients to suit your needs. LED lighting illuminates the interior too, providing visibility throughout the cabinet. The glass door on this unit is designed with a "Low-E" double pane and features an extruded aluminum frame. When cleaning around or servicing the refrigerator, easily move it to where you need with its (4) 5" casters. Blue Color! Cost $3,287.00

True Refrigeration GDM-49F-HC~TSL01 Attractively display merchandise and encourage impulse sales of frozen treats, entrees, and other to-go items with this True glass door merchandiser freezer! Creating impulse sales is a vital component for many businesses, and it will benefit your establishment to have a high-quality merchandising freezer located strategically in high-traffic areas. This model will serve you for years to come, as it features a durable construction, dependable features, and LED lighting for maximum product visibility and energy savings! The triple-pane, thermal insulated swinging glass doors provide excellent product visibility and are self-closing to help minimize energy waste. Featuring bright and even LED lighting, this refrigerator showcases your products more vividly than a unit with fluorescent lighting. The easily replaceable, energy-efficient LEDs generate less heat than fluorescent bulbs to keep internal temperatures low, and because they last significantly longer than other lights, you'll save money on replacement costs over time. The lights are safety shielded for added peace of mind. The construction of this unit is designed with commercial use in mind. It features a black powder-coated steel exterior and white aluminum interior. The exterior coating is peel- and chip-resistant for long-lasting use, while the interior features a stainless steel floor and is fortified with foamed-in-place polyurethane insulation that helps provide structural rigidity and maintain internal temperatures. Plus, an illuminated exterior sign panel offers additional branding options (signs sold separately). This unit includes two sections with four shelves each that will aid in organizing your merchandise. Plus, the heavy-duty PVC-coated wire shelves are adjustable in 1/2" increments to help you organize your ice-cold beverages and grab-and-go items in an appealing, efficient way! This unit has a bottom-mounted compressor that is easily accessible for maintenance and servicing. This refrigerated merchandiser ensures optimal performance by operating with a 3/4 hp refrigeration system that circulates R-290 refrigerant to maintain a temperature of -10 degrees Fahrenheit. R-290 refrigerant has an ozone depletion potential (ODP) of 0 and a global warming potential (GWP) of 3. An auto-defrost feature keeps the freezer running properly at all times. This unit requires a 115V electrical connection for operation. Damage/dents noted to unit, shown in pictures.  Cost $8,005.00

The Traulsen G-Series LED glass door freezer merchandiser is made for the spotlight. This model features LED lights built right into the doors, providing incredible illumination of the products inside without adding any heat to the interior! The combination of superior air-flow design, thermal expansion valve technology and a balanced refrigeration system ensures rapid temperature recovery in real world operation. The G-Series freezer utilizes the maximium available capacity of the unit by locating the evaporator coil outside of the food zone. This model features an easy-to-use water-resistant microprocessor control system with 3-digit LED display. The patented door design includes locks, a stay-open feature of 120 degrees, and easy to clean door gaskets. Door hinges are guaranteed for life. Standard features include: 2 door model High performance, energy efficient refrigeration system Reliable microprocessor control with LED temperature display Load-sure guard prevents problems from improper loading Stainless steel front with anodized aluminum sides and interior Embedded LED door with lock Long life EZ clean door gasket (3) epoxy coated shelves per section Easy-to-maintain front facing condenser coil 6"H locking casters Guaranteed for life door hinges Cost $13,447.00

This undercounter freezer is perfect for providing out of the way, frozen food storage when space is a limiting factor. The compact, shallow depth design frees up valuable kitchen space without sacrificing product space. Stainless steel front, sides, and top with a corrosion-resistant aluminum interior Self-closing door with stay-open feature, magnetic gasket, and field-reversible design Glass door allows for product visibility and easy retrieval Full electronic control with an automatic evaporator for easy operation and maintenance Uses eco-friendly R290 refrigerant; 115V, 1/10 hp Cost $2,758.00

FWE PHTT-6 1/2 Height Insulated Mobile Heated Cabinet w/ (6) Pan Capacity, 120v. FWE's PHTT series is unrivaled regarding heated moisture holding cabinets. Every detail of every unit is manufactured from top to bottom with the utmost care and highest quality material. With the PHTT series, users can expect consistency, simplicity, and superior results after every use. Equipped with our exclusive ClymateIQ heating system, these units reach user inputted heat (90°F - 200°F / 32°C - 93°C) and humidity levels (0% - 90%) up to 25% faster than the competition. This rapid heating translates to quicker recovery times even with frequent opening and closing of the unit! Our intuitive ClymateIQ technology maintains the optimal user-set environment by combining a computer-backed heating and monitoring system with our unique push/pull air distribution system. This takes the guesswork out of holding foods and yields outstanding results every time. Our user-friendly controls make setting temperature and humidity levels a breeze. Simply use the digital display to input your desired settings, place your products in, and then you're done! Recess protection also shelters these controls from accidental bumps that could alter your settings, or even cause damage. All PHTT units come standard with self-closing hinges to ensure the cabinet's doors automatically shut to save valuable time and energy. These cabinets are also fully insulated from top to bottom to provide the utmost protection against heat loss. This is unlike many other manufacturers' cabinets that only offer localized insulation. Clean-up is easy with completely removable drawers and slides. The top-mounted heating system combined with a smooth stainless steel surface creates a straightforward cleaning process as simple as taking a moist towel and wiping clean the interior of the unit. PHTT-6 Model Description FWE's PHTT-6 is our half-sized version of a precision heated moisture holding cabinet, standing at just 43.75" high. This unit can handle six pairs of slides at standard 4.5" spacing. Our exclusive adjustable shelving system means users can add or subtract slides or shelves to accommodate their specific holding need. This unit can create valuable space by adding easily accessible heated holding for chefs on their make lines, or for additional storage wherever you may need it! PHTT-6 Key Features - Half-size size to add flexibility and additional storage where needed. - Comes standard with 6 shelves for holding food items. - Shelving system for removable and adjustable tray slides for universal range of trays and pans. - FWE's exclusive ClymateIQ heating system allows for pinpoint control over temperature from 90-200°F and humidity from 0-90% within the unit. - Fast recovery times allow for repeat usage during peak service times without significant loss of heat and moisture within the unit. - Simple and easy to remove slides, heating element, and water pan allow users to easily clean the interior of the unit. - Intuitive color-coded control panel for easily adjusting temperature and humidity levels - Self-closing hinges. Cost $8,502.00

Grind peanuts, cashews, almonds, pistachios and other nuts. 20 pound capacity. Single Phase, 115v. Full-Service or Self-Service. Timer controlled or continuous operation. Stainless steel auger & burrs. All commercial components. 1.5 HP industrial motor. Easy, tool-free cleanup. Red cabinet. NSF Certified. Made in USA Cost $899.00

Chefmate Food Slicer, economy series, manual, 12" diameter, angle-gravity feed chute, top-mounted knife sharpener, belt driven, ball bearing chute slide, deflector can be removed without tools, motor overload protection with manual reset, anodized aluminum construction, 1/3 HP, 115v/60/1-ph, 2.7 amps, NEMA 5-15P, cETLus, NSF Description: This item is ideal for cutting delicate ham, turkey, and other meats. Great for sub shops, school cafeteria kitchens, and other food service establishments. Features 0 to 9/16" slice thickness. 1/3 HP knife motor is fan cooled, and permanently lubricated ball bearings ensure quiet operation. Thermal overload protection included. Oversized positive traction grooved belt drive Smooth stainless ball bearing chute slide Angled gravity feed chute Ergonomically designed, dual purpose handle Power indicator light Manual reset button: motor overload protection allows the operator to reset the slicer manually. Unit is supplied with non-slip rubber feet Quality Construction Anodized, stain resistant aluminum construction with seamless edges and radius corners. Lightweight and compact, space-saving design Knife hub bearings, belt and motor are fully enclosed, protecting them from moisture Hard chromed, special allow hollow ground knife lasts longer and sharpens easily. Top mounted, two-stone, dual action knife sharpener allows quick return of the blade to a razor-sharp edge. Removable for easy cleaning. Removable, easy-to-clean chute, slice deflector, knife cover and sharpener Metal bottom enclosure safeguards components from food and debris Moisture-proof, easy-to-clean On/Off switch Cost $1,756.00

The unit serves as the perfect solution for those who wish to equip their convenience store, fuel station, snack bar, and break room with the ability to produce great-tasting, hot food fast. An easyToUCH™ icon-driven touch screen offers intuitive control of the unit, while multi-stage programming is available with up to six stages, each with its own time, microwave power, impingement settings, and between stage instructions. can prepare foods up to 15 times faster than conventional ovens. Its built-in catalytic converter allows it to be operated without a venting system. Removable internal and external air and grease filters help to maintain the performance and cleanliness of the unit and its surrounding area. This helps to save energy and reduce noise. Because of its ventless design, the oven is easy to place in your kitchen, as it doesn't require a hood for operation; however, as local codes may vary, please contact your local regulatory authority to confirm that ventless operation is permitted. Comes with accessories! Cost $14,560.00

The Star 524TGF Star-Max® electric griddle has heating elements spaced every 12 inches to ensure heat is evenly distributed across the griddle plate. An embedded snap-action thermostat adjusts the temperature from 150 to 450 degrees Fahrenheit. To withstand heating up and cooling down repeatedly, the plate is 1 inch thick and has superior heat distribution and retention. Splash guards catch grease splatter, keeping walls and countertops around the griddle clean. Operators can direct grease from the plate into the 3.5-inch-wide trough. Since the trough is wide enough to accommodate a spatula, users can push grease into the 4.5-quart grease drawer. Separating the operator from heat, the stainless steel bullnose front on this Star 524TGF electric griddle also protects the knobs from damage. Product Details 1-in.-thick polished steel plate evenly distributes heat and resists wear and tear Heating element is placed every 12 in. to ensure heat is even for exact cooking results Snap-action thermostat is embedded 0.1875 in. under the surface Temperature range: 150-450 degrees F Heavy-duty metal knobs withstand repeated use Grease trough is 3.5 in. wide to accommodate a spatula 4.5-qt. grease drawer holds liquids until cleanup Stainless steel bullnose front provides protection for the knobs and operator 4.5-in. tapered splash guards reduce grease splatter and debris on the counter Durable stainless steel top and front withstand heavy use and resist corrosion Part of the Star-Max series Cost $2,914.00

The Star 524TGF Star-Max® electric griddle has heating elements spaced every 12 inches to ensure heat is evenly distributed across the griddle plate. An embedded snap-action thermostat adjusts the temperature from 150 to 450 degrees Fahrenheit. To withstand heating up and cooling down repeatedly, the plate is 1 inch thick and has superior heat distribution and retention. Splash guards catch grease splatter, keeping walls and countertops around the griddle clean. Operators can direct grease from the plate into the 3.5-inch-wide trough. Since the trough is wide enough to accommodate a spatula, users can push grease into the 4.5-quart grease drawer. Separating the operator from heat, the stainless steel bullnose front on this Star 524TGF electric griddle also protects the knobs from damage. Product Details 1-in.-thick polished steel plate evenly distributes heat and resists wear and tear Heating element is placed every 12 in. to ensure heat is even for exact cooking results Snap-action thermostat is embedded 0.1875 in. under the surface Temperature range: 150-450 degrees F Heavy-duty metal knobs withstand repeated use Grease trough is 3.5 in. wide to accommodate a spatula 4.5-qt. grease drawer holds liquids until cleanup Stainless steel bullnose front provides protection for the knobs and operator 4.5-in. tapered splash guards reduce grease splatter and debris on the counter Durable stainless steel top and front withstand heavy use and resist corrosion Part of the Star-Max series Cost $2,914.00

The Crown Steam SX-55EC convection steamer has two independent compartments that accommodate 10 total food pans. To ensure proper cooking times, it has a 60-minute timer that sounds an alarm to inform nearby employees when food is ready. Trapping heat inside, the door has a seal around its perimeter, and the steam automatically stops when the door is open, resuming as soon as it's shut. Elevating it off the ground, this unit is mounted on a cabinet base, while four legs provide security. To ensure clean water, the Crown Steam SX-55EC commercial convection steamer has a filter, and the power switch has three functions: on, off, and delime. Users can then use the spring release to pop open the door and retrieve the food pans. When a door opens, steam flow to that compartment stops to reduce the risk of user burns, and if water drips when the door is open, a drip trough keeps it away from the kitchen floor. To make the unit durable, it is made of corrosion-resistant stainless steel. Product Details Accommodates 10 food pans in 2 compartments Power switch has on, off, and delime functions 60-min. timer with an audible alarm Light indicates the unit is ready or cooking Door seal prevents heat from escaping Drip trough collects condensation Split water connections with a water filter Steam stops when door is opened and resumes when shut Cabinet base raises steamer Automatic generator blow down valve Constructed of stainless steel Mounted on 4 adjustable legs 1-in. IPS drain piped to floor drain Incoming water pressure: 25-50 PSI. Convection Steamer, electric, (10) pan capacity total, manual controls, three way power switch (ON/OFF/Delime), automatic blow down, split water connections, includes water filter system, stainless steel interior & exterior, cabinet base, (2) 15 kW, cCSAus, NSF Cost $27,330.00

Up to 520 lbs of ice produced per 24 hours Mount 2 units side-by-side for 2x the ice production Produces crescent shaped ice cubes Durable stainless steel exterior Compatible bins & dispensers, sold separately: B-250, B-300, B-500, B-700, B-800, B-900, B-1150, B-1300, DB-130H, DB-200H, DM-200B EverCheck™ alert system CycleSaver™ design Protected by H-GUARD Plus Antimicrobial Agent R-404A refrigerant (1 lbs. 8 oz. / 680 g) Heat Rejection: BTU/hr Ambient temperature range: 45 – 100°F Water temperature range: 45 – 90°F Water pressure: 10 – 113psig Voltage range: 187 – 253V 7.2 amps (15 Amp Max fuse) 5.51 kwh/100 lbs.@ 90/70 Single phase, 208-230v/60/1 Clean ice and easy maintenance lead to longer unit life span Cost $6,591.00

The M-Series set of standard features (pre-wired and mounted except as noted)* include: ● Liquid line and suction line vibration absorbers (eliminators) for semi-hermetic units only ● Preset non-adjustable high pressure control and preset non-adjustable low pressure control** ● Crankcase heater ● Head pressure control (flooding valve) ● Heavy gauge, galvanized steel mechanically-fastened weather hood ● Suction service valve ● Heavy-duty angle leg base ● Liquid line filter/drier ● Pre-wired electrical control panel ● Sight glass ● Liquid and suction line kit with service valve ● Timer (standard on low temp units only) ● Compressor contactor ● Defrost heater contactor (when required) ● Generously-sized condenser (rated up to 120° ambient) ● Rifled tubes in condenser for greater efficiency ● Liquid line shut-off valve for easy change of filter ● PSC condenser fan motors ● Large liquid receiver Cost $4,180.00

The Koolaire K-400 ice bin has an ice capacity of 365 pounds. Its door stays open when employees take ice out so that they can scoop with one hand and hold the container with the other. An internal scoop holder keeps the scoop out of the ice, preventing hands from contacting ice and contaminating it. Ice melts slowly since the door is foam insulated and retains cold air. The exterior of the Koolaire K-400 ice bin has a stainless-like finish that resists corrosion. Note: Does not produce ice. Must be paired with an ice maker head unit. Product Details 365-lb. ice capacity 12.3-cu.-ft. AHRI-certified interior space Door stays open so users can scoop ice without holding the door Internal scoop holder reduces the risk of contamination Foam-insulated door retains cold air to slow melting Stainless-like finish resists corrosion Black side panels 4 legs lift the unit up for cleaning underneath Cost $1,740.00

This Kelmax aluminum rack holds ten 18 x 26" pans or trays. It has an all‐welded construction and is mounted on 5" poly swivel casters for easy maneuvering. Heavy duty runners welded to uprights. Unit designed to hold both 18" x 26" sheet pans and 14" x 18" trays Cost $616.42

This Kelmax aluminum rack holds ten 18 x 26" pans or trays. It has an all‐welded construction and is mounted on 5" poly swivel casters for easy maneuvering. Heavy duty runners welded to uprights. Unit designed to hold both 18" x 26" sheet pans and 14" x 18" trays Cost $616.42

This Kelmax aluminum rack holds ten 18 x 26" pans or trays. It has an all‐welded construction and is mounted on 5" poly swivel casters for easy maneuvering. Heavy duty runners welded to uprights. Unit designed to hold both 18" x 26" sheet pans and 14" x 18" trays Cost $616.42

This Kelmax aluminum rack holds ten 18 x 26" pans or trays. It has an all‐welded construction and is mounted on 5" poly swivel casters for easy maneuvering. Heavy duty runners welded to uprights. Unit designed to hold both 18" x 26" sheet pans and 14" x 18" trays Cost $616.42

Stock Pot Range, gas, 36", (2) cast iron three-ring burners, (2) cast iron top grates, (4) infinite heat control valves, drip pan, spill-proof pilot ignition system, pressure regulator, stainless steel exterior, aluminized steel base, 6" adjustable legs, 200,000 BTU, cULus, UL-Sanitation Natural Gas Cost $1,120.00

Upgrade your restaurant's grilling capabilities by adding this Vulcan VCRG24-M1 24" countertop natural gas griddle with manual controls to your cooking lineup. Featuring a powerful 25,000 BTU U-shaped aluminized steel burner for every 12" of griddle plate, this unit offers a total of 50,000 BTU. The 1" thick polished steel griddle plate is ideal for your high volume business since its thick design provides greater heat retention and faster recovery for your busiest breakfast shifts. For long-lasting durability that withstands a harsh commercial environment, this unit boasts a fully welded stainless steel body with an aluminized frame. 4" adjustable legs raise the unit to a more comfortable working height, and when it's time for a thorough cleaning, a 4 1/2 qt. removable grease pan both eases and expedites the process. This unit requires a natural gas connection but can be field converted to liquid propane. Cost $1,965.00

Up to 632 lbs of ice produced per 24 hours Mount 2 units side-by-side for 2x the ice production Produces crescent shaped ice cubes Durable stainless steel exterior Compatible bins & dispensers, sold separately: B-250, B-300, B-500, B-700, B-800, B-900, B-1150, B-1300, DB-130H, DB-200H, DM-200B EverCheck™ alert system CycleSaver™ design Protected by H-GUARD Plus Antimicrobial Agent R-404A refrigerant (4 lbs. 4.8 oz / 1950 g) Heat Rejection:10200 BTU/hr Ambient temperature range: 45 – 100°F Water temperature range: 45 – 90°F Water pressure: 10 – 113psig Voltage range: 104 – 127V 16.1 amps (20 Amp Max fuse) 5.3 kwh/100 lbs.@ 90/70 Single phase, 115v/60/1, 3 wire, including ground. Must be hardwired at site, no cord/plug included Clean ice and easy maintenance lead to longer unit life span Cost $4,795.00

Lancer 85-0462, 100 Lb Ice Chest w/ 9-Circuit Cold Plate, IC 400 Opens left-to-right One inch molded Polyurethane structural insulation on all sides and bottom 9 circuit post mix sealed cold plate NSF approved sliding lids All Stainless Steel construction Designed for post-mix 1/2" Drain Cost $1,280.00

Free shipping to the USA lower 48 states. GMCW TB3 3 Gallon Tea Brewer w/B1/3T Dispenser. Effortless Brewing and Dispensing. The high-performance TB3 Iced Tea Brewer brews 3 gallons of crisp, delicious iced tea in just 5 minutes. It features a low temperature lockout system that will prevent brewing until the water has reached its proper temperature to ensure great tasting drinks. The iced tea brews directly into the B1/3T seamless stainless steel dispenser, which facilitates easy cleaning and crisp taste. • Brew timer adjustment controls the brewing time • Clear plastic brew funnel with restrictor • Stainless steel body construction • Brew - through cover Description: Model TB3 Brewer with B1/3T Dispenser (069363L) Plumbing: 0.25” water line required Electrical: 120V / 15A / 1 Ph - NEMA 5-15P line cord included Product Dimensions: (H x W x D) 33.25” x 9.25” x 22.75” Ship Weight: 46 lbs. Cost $1,290.00